Overview
On Site
$150000
Full Time
Skills
substation
CAD Drafting
Job Details
Position Title: Substation Engineer III
Why Position is Open: Backfill
Employment Type: FTE/DH
Location of Position: Vinita, OK
Work Schedule: M-F, 8-5
Travel: Light
Safety Sensitive: YES
Top Required Skill Sets:
1. Substation Design
2. CAD Design
Target Salary (Direct Hire): $120,000 - $150,000
Summary/Objective:
With moderate supervision, design the physical layout of substations to comply with Rural Utilities Service (RUS) Bulletins, National Electric Safety Code (NESC), National Electric Code (NEC), American National Standards Institute (ANSI), and Institute of Electrical and Electronics Engineers (IEEE) standards as well as develop materials contracts and procurement specifications to ensure safe and reliable electric service.
Essential Functions
With moderate supervision, work on the physical design of new substations or maintenance redesign of existing structures. Develop project scopes, conceptual designs, one-line diagrams and cost estimates for substation projects.
Under moderate supervision, will assist in preparing and applying specifications, codes and standards.
Perform CAD drafting of each substation design and make necessary changes and corrections to drawings and documentation.
Prepare and finalize record drawings from field “redline” drawings for each assigned project.
Create grading plans for new and existing substations to ensure proper water drainage.
Design Spill Prevention and Control Countermeasure (SPCC) plans for oil containment at each substation.
Preparation of the following substation drawings: General layout and arrangement plan, electrical equipment plans, section views (elevations), detailed bill of material, lightning strike shielding plan, grounding plan, conduit plan and below grade conduit/raceway plan, and control building specifications and equipment.
Under moderate supervision, generate useable, complete and accurate designs, drawings, specifications, and construction and material contracts in a timely manner for substation construction contracts and bid documents. Verify on time material delivery for substation construction.
Perform simple and routine engineering design tasks using standard techniques.
Review equipment manufacturer drawings for approval.
Provide mentoring and guidance to lower level employees.
May function as a project lead for substation projects if needed and directed by manager.
Make on-site visits to new and existing substation sites to confirm as-builts as needed.
Knowledge
Intermediate knowledge of AutoCAD Civil 3D and its use in the design of electric power transmission and distribution substations. Employee will assist in the design, development, and implementation of a substation. Intermediate knowledge of substation layouts, grading plans, soil boring and ground resistivity testing, and spill prevention and containment plans. Demonstrate intermediate technical knowledge of substation components such as transformers, circuit
breakers, circuit switchers, capacitor banks, wave traps, reactors, and buss work. Intermediate knowledge of NESC and NEC code, IEEE and ANSI standards is required. Intermediate knowledge of Rural Utilities Service (RUS) substation design guidelines and bulletins, particularly physical clearance requirements. Must become knowledgeable of RUS construction contract and material contract procedures.
Skills
Proficient in Microsoft Office products (Word, Excel, PowerPoint, Outlook). Proficient in AutoCAD Civil 3D. Keep current with changing industry trends and technology. Capable of working with a high degree of accuracy. Must have good interpersonal skills to interact with all KAMO employees, member systems and other utilities as well as strong communication skills and technical writing
skills. Must have strong organizational skills.
Abilities
Must be organized and a self-starter. Requires ability to solve complex problems requiring a great deal of originality, independent thinking, strong analytical/problem solving skills, critical and logical thinking. Must be committed to productivity with a high degree of accuracy. Ability to generate useable, complete and accurate designs, drawings, specifications, and construction and material contracts in a timely manner. Ability to plan, organize and prioritize time/workload to accomplish tasks and meet deadlines. Ability to adapt to changing business circumstances and handle multiple tasks. Ability to build and maintain professional relationships, establish credibility and trust, cooperate and communicate with other employees within and outside of the department
including project managers, other engineers, outside vendors and contractors during construction and planning of projects.
Experience & Education
Bachelor of Science Degree in Mechanical, Civil, Electrical Engineering from an Accreditation Board for Engineers and Technology (ABET) accredited school is required. Requires four (4) to seven (7) years of experience.
Advancement to the next grade level is not automatic and is determined by several factors, one of which is a successful evaluation by the department manager and the demonstrated ability to perform the functions as outlined.
TULIT
Why Position is Open: Backfill
Employment Type: FTE/DH
Location of Position: Vinita, OK
Work Schedule: M-F, 8-5
Travel: Light
Safety Sensitive: YES
Top Required Skill Sets:
1. Substation Design
2. CAD Design
Target Salary (Direct Hire): $120,000 - $150,000
Summary/Objective:
With moderate supervision, design the physical layout of substations to comply with Rural Utilities Service (RUS) Bulletins, National Electric Safety Code (NESC), National Electric Code (NEC), American National Standards Institute (ANSI), and Institute of Electrical and Electronics Engineers (IEEE) standards as well as develop materials contracts and procurement specifications to ensure safe and reliable electric service.
Essential Functions
With moderate supervision, work on the physical design of new substations or maintenance redesign of existing structures. Develop project scopes, conceptual designs, one-line diagrams and cost estimates for substation projects.
Under moderate supervision, will assist in preparing and applying specifications, codes and standards.
Perform CAD drafting of each substation design and make necessary changes and corrections to drawings and documentation.
Prepare and finalize record drawings from field “redline” drawings for each assigned project.
Create grading plans for new and existing substations to ensure proper water drainage.
Design Spill Prevention and Control Countermeasure (SPCC) plans for oil containment at each substation.
Preparation of the following substation drawings: General layout and arrangement plan, electrical equipment plans, section views (elevations), detailed bill of material, lightning strike shielding plan, grounding plan, conduit plan and below grade conduit/raceway plan, and control building specifications and equipment.
Under moderate supervision, generate useable, complete and accurate designs, drawings, specifications, and construction and material contracts in a timely manner for substation construction contracts and bid documents. Verify on time material delivery for substation construction.
Perform simple and routine engineering design tasks using standard techniques.
Review equipment manufacturer drawings for approval.
Provide mentoring and guidance to lower level employees.
May function as a project lead for substation projects if needed and directed by manager.
Make on-site visits to new and existing substation sites to confirm as-builts as needed.
Knowledge
Intermediate knowledge of AutoCAD Civil 3D and its use in the design of electric power transmission and distribution substations. Employee will assist in the design, development, and implementation of a substation. Intermediate knowledge of substation layouts, grading plans, soil boring and ground resistivity testing, and spill prevention and containment plans. Demonstrate intermediate technical knowledge of substation components such as transformers, circuit
breakers, circuit switchers, capacitor banks, wave traps, reactors, and buss work. Intermediate knowledge of NESC and NEC code, IEEE and ANSI standards is required. Intermediate knowledge of Rural Utilities Service (RUS) substation design guidelines and bulletins, particularly physical clearance requirements. Must become knowledgeable of RUS construction contract and material contract procedures.
Skills
Proficient in Microsoft Office products (Word, Excel, PowerPoint, Outlook). Proficient in AutoCAD Civil 3D. Keep current with changing industry trends and technology. Capable of working with a high degree of accuracy. Must have good interpersonal skills to interact with all KAMO employees, member systems and other utilities as well as strong communication skills and technical writing
skills. Must have strong organizational skills.
Abilities
Must be organized and a self-starter. Requires ability to solve complex problems requiring a great deal of originality, independent thinking, strong analytical/problem solving skills, critical and logical thinking. Must be committed to productivity with a high degree of accuracy. Ability to generate useable, complete and accurate designs, drawings, specifications, and construction and material contracts in a timely manner. Ability to plan, organize and prioritize time/workload to accomplish tasks and meet deadlines. Ability to adapt to changing business circumstances and handle multiple tasks. Ability to build and maintain professional relationships, establish credibility and trust, cooperate and communicate with other employees within and outside of the department
including project managers, other engineers, outside vendors and contractors during construction and planning of projects.
Experience & Education
Bachelor of Science Degree in Mechanical, Civil, Electrical Engineering from an Accreditation Board for Engineers and Technology (ABET) accredited school is required. Requires four (4) to seven (7) years of experience.
Advancement to the next grade level is not automatic and is determined by several factors, one of which is a successful evaluation by the department manager and the demonstrated ability to perform the functions as outlined.
TULIT
Employers have access to artificial intelligence language tools (“AI”) that help generate and enhance job descriptions and AI may have been used to create this description. The position description has been reviewed for accuracy and Dice believes it to correctly reflect the job opportunity.