Overview
On Site
Full Time
Skills
Semiconductors
Bridging
Health Care
LinkedIn
Twitter
Systems Design
IT Management
Embedded Software
Firmware
Debugging
Budget
Product Requirements
Management
JIRA
Requirements Management
Jama
Project Management
Collaboration
Marketing
Art
Electrical Engineering
Mechanical Engineering
Control Engineering
C
C++
Embedded Systems
SPI
UART
Ethernet
I2C
Prototyping
Computer Hardware
Problem Solving
Conflict Resolution
Laboratory Equipment
ARM
Digital Signal Processing
FPGA
Software Development
LabVIEW
MATLAB
Python
PCB Design
Cadence
Allegro
MEMS
Manufacturing
Communication
Energy
Motivation
Product Development
Licensing
Military
Law
Job Details
About Analog Devices
Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible . Learn more at and on LinkedIn and Twitter (X).
Job Description:
Analog Devices, Inc. currently has a position open for a MEMS System Design Engineer within the Inertial MEMS Technology Group. The primary responsibility of this position is to lead the development of systems and subsystem products in the MEMS technology group. This position will lead new product development teams to develop, qualify and release MEMS system level products including inertial measurement units (IMUs) and inertial sensing modules such as vibration sensing modules or navigation modules. The engineer will need to draw upon a broad knowledge across different technologies and lead the cross-functional teams to deliver the system products to navigation, condition based monitoring and broad inertial sensing markets.
Essential Duties & Responsibilities:
Technical leadership responsible for development and characterization of cutting-edge system level products from concept to high volume production.
Write, debug and maintain embedded software/firmware code for inertial MEMS products.
Ensure conformance of embedded code with stakeholder requirement through rigorous verification
Design and execute laboratory experiments to debug and characterize new products for both hardware and software verification
Creating and maintaining project plans and schedules to bring new products to market in a timely fashion and within budget.
Manage product requirements, including stakeholder requirements, system, hardware and software requirements, as well as requirement traceability and validation/verification.
Use of common task management tools (JIRA) and common requirements management tools (JAMA) for project management. Translate system level requirements into verification strategies.
Communicate and collaborate with design, application, marketing, test development and manufacturing teams to develop the products.
Work with process, packaging, yield and quality groups to improve or resolve process/ product interactions, yield and quality issues.
Interact with marketing, application and customers to identify and define new products as well as resolve product/application issues.
Reviewing product details; guiding performance specifications in datasheets.
Innovative thinking and strong initiative to push the state of the art is necessary.
Minimum Qualifications:
MS or PhD degree in Electrical, Mechanical or Controls Engineering
Experience in developing C/C++ on embedded platforms
Strong understanding of Analog and Digital Circuits
Good understanding of communication protocols such as SPI, UART, Ethernet, I2C and RS-422
Experience in design and bring-up of product prototypes in both Hardware and Software
Excellent troubleshooting skills including leading team for problem-solving and hands-on experience conducting experiments with lab equipment.
Preferred Qualifications:
Experience with ARM/DSP/FPGA platforms is a plus
Experience with software development using LabVIEW, MATLAB or Python is a plus
Experience with PCB design tools such as Cadence Allegro is a plus
Experience with MEMS process, package and manufacturing technology is a plus
Experience with developing application devices/boards is a plus
Excellent communication skills and experience working in multidisciplinary team environments
High energy and motivation required to lead product development and support a fast-growing business
#LI-PG1
For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except s, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process.
Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group.
EEO is the Law: Notice of Applicant Rights Under the Law.
Job Req Type: Experienced
Required Travel: Yes, 10% of the time
Shift Type: 1st Shift/Days
Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible . Learn more at and on LinkedIn and Twitter (X).
Job Description:
Analog Devices, Inc. currently has a position open for a MEMS System Design Engineer within the Inertial MEMS Technology Group. The primary responsibility of this position is to lead the development of systems and subsystem products in the MEMS technology group. This position will lead new product development teams to develop, qualify and release MEMS system level products including inertial measurement units (IMUs) and inertial sensing modules such as vibration sensing modules or navigation modules. The engineer will need to draw upon a broad knowledge across different technologies and lead the cross-functional teams to deliver the system products to navigation, condition based monitoring and broad inertial sensing markets.
Essential Duties & Responsibilities:
Technical leadership responsible for development and characterization of cutting-edge system level products from concept to high volume production.
Write, debug and maintain embedded software/firmware code for inertial MEMS products.
Ensure conformance of embedded code with stakeholder requirement through rigorous verification
Design and execute laboratory experiments to debug and characterize new products for both hardware and software verification
Creating and maintaining project plans and schedules to bring new products to market in a timely fashion and within budget.
Manage product requirements, including stakeholder requirements, system, hardware and software requirements, as well as requirement traceability and validation/verification.
Use of common task management tools (JIRA) and common requirements management tools (JAMA) for project management. Translate system level requirements into verification strategies.
Communicate and collaborate with design, application, marketing, test development and manufacturing teams to develop the products.
Work with process, packaging, yield and quality groups to improve or resolve process/ product interactions, yield and quality issues.
Interact with marketing, application and customers to identify and define new products as well as resolve product/application issues.
Reviewing product details; guiding performance specifications in datasheets.
Innovative thinking and strong initiative to push the state of the art is necessary.
Minimum Qualifications:
MS or PhD degree in Electrical, Mechanical or Controls Engineering
Experience in developing C/C++ on embedded platforms
Strong understanding of Analog and Digital Circuits
Good understanding of communication protocols such as SPI, UART, Ethernet, I2C and RS-422
Experience in design and bring-up of product prototypes in both Hardware and Software
Excellent troubleshooting skills including leading team for problem-solving and hands-on experience conducting experiments with lab equipment.
Preferred Qualifications:
Experience with ARM/DSP/FPGA platforms is a plus
Experience with software development using LabVIEW, MATLAB or Python is a plus
Experience with PCB design tools such as Cadence Allegro is a plus
Experience with MEMS process, package and manufacturing technology is a plus
Experience with developing application devices/boards is a plus
Excellent communication skills and experience working in multidisciplinary team environments
High energy and motivation required to lead product development and support a fast-growing business
#LI-PG1
For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except s, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process.
Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group.
EEO is the Law: Notice of Applicant Rights Under the Law.
Job Req Type: Experienced
Required Travel: Yes, 10% of the time
Shift Type: 1st Shift/Days
Employers have access to artificial intelligence language tools (“AI”) that help generate and enhance job descriptions and AI may have been used to create this description. The position description has been reviewed for accuracy and Dice believes it to correctly reflect the job opportunity.