Overview
On Site
USD 32.00 - 43.00 per hour
Full Time
Skills
Network
GRID
Energy
Accountability
Electrical Engineering
Optical Fiber
Proprietary Software
Performance Metrics
Documentation
Honesty
Training
Specification Gathering
Cabling
Auditing
Quality Control
Inspection
Reporting
Spring Framework
OQ
Microsoft Deployment Toolkit
MDT
UG
Staff Augmentation
Management
Microsoft Outlook
Microsoft
Distribution
Communication
Taxes
Life Insurance
Partnership
Collaboration
Business Transformation
Law
Job Details
Description
Our client is an OPCO of Exelon, one of the largest Energy providers in the U.S (Mainly East Coast and Mid Atlantic). Exelon as a whole is consistently upgrading/expanding their utility network across all OPCO's tied to various initiatives/government regulations not limited to AMI (Advanced Meter Infrastructure), Grid Modernization, Clean Energy, etc. In order to keep up with pace and demand of these builds, our client leverages an ecosystem of Construction/Engineer vendors and needs to ensure they are providing oversight and QC efforts to make sure work is up to our clients standards and ultimately protect the networks integrity/safety. This is also an effort to hold the Vendors accountable and raise awareness around their metrics on various scorecards. With increased builds, the Quality and Standards department of our client is taking on more business units such as Electrical Distribution, Substations, Gas Transmission, and Fiber (Each QC resource is allocated based on their specialty).
The QC inspector will work on directly with a lead everyday to identify plan and routes of QC (The lead is performing more of the communication with the Construction Vendor but QC inspector also needs to be able to do this). They will then go to various sites and perform Quality Control visual inspections of both Aerial and Underground builds. The Aerial will all be post construction, the underground will be during. They will use Proprietary software called QCI which gives them checklist to evaluate on each job, assess whether the specific scope has passed or failed the various check list, take various photos of work completed, document work and communicate across the various parties involved. Don't just capture only deviations, also capture any work that is structured correctly and associate that to performance metrics. A large portion of this role will be in the field, with some office and home (Very light and situational) documentation.
A Quality Control (QC) Inspector for our client is a high visibility position; therefore, the inspector must always present themselves in a professional manner, with honesty and integrity. A QC Inspector must possess good interpersonal skills and willingness to learn. A QC Inspector is an individual who observes, monitors, and documents the execution of construction work performed in the field by utility and contractors crews. A QC Inspector primarily performs quality inspections on work currently being performed or work that has been recently completed, utilizing established checklists. A QC Inspector will also perform and document field safety audits, utilizing the utility Safety Website. - Candidates for the Overhead QC Inspector positions will have to successfully complete and/or demonstrate knowledge of: utility QC Inspector Qualification Training, Proficiency using the utility Standards (C-Specs), Proficiency using utility maps and locating equipment in the field, Knowledge of utility work practices and procedures, Knowledge of the utility Safety Rule Book and other underground safety rules. Contractor candidates holding current industry underground certifications for performing overhead activities will be evaluated and portions of the above requirements may be waived. Specific Duties and Responsibilities - A QC Inspector's primary duties are (but are not limited to:) Spend 95+% of their time in the field performing QC inspections, Inspection of existing utility facilities such as URD cables, splices, terminations, transformers, and other facilities as required, Observe the construction of URD splices and terminations while being constructed, Document identified deviations in QCI in a timely manner, Conduct and document Safety Audits as required, Attend weekly staff meetings. Must have 3 - 5 years of QC inspection experience in a utility setting.
Skills
osp, construction, utility construction, aerial, underground utilities, gas transmission, design-build
Top Skills Details
osp,construction,utility construction,aerial,underground utilities,gas transmission
Additional Skills & Qualifications
nspector will report to the office on Tuesday at 7:30am (Spring Gardens, Race Street Baltimore), review the days schedule of inspections then travel to the job sites to review the quality of the contractor's construction. Monday - Friday, there will be a morning call everyday at 7:30am then they will follow the same pattern as previous.
5 days a week, 8hrs a day
Gas construction experience on systems is a requirement. Familiarity with our cleints OQ's and Redbook. Ability to use supplied MDT and computer applications.
Quality Inspector overseeing Electric Distribution OH and UG construction
a. Quality captures to ensure construction work is performed to our clients and Regulatory standards and processes. Also documenting and measuring contractor construction performance and metrics
b. Quality Department is currently 6 internal employees, and 5 staff aug employees. Team will be expanding through 2024
No remote availability, inspector to be on site every day overseeing crews. Limited options to work from home possibly 1 day a week if weather is an issue or backlog of information needs to be input into QCI software
d. Microsoft Outlook, AS8 (preferrable), Microsoft Teams
e. For the Electric Distribution position - Experience in distribution construction or quality oversight. For the Gas position - Experience in gas construction or quality oversight
f. Verbal communication skills, ability to deescalate situations
Resources will be driving their own vehicles but will receive mileage reimbursement.
Experience Level
Intermediate Level
Pay and Benefits
The pay range for this position is $32.00 - $43.00/hr.
Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:
Medical, dental & vision
Critical Illness, Accident, and Hospital
401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available
Life Insurance (Voluntary Life & AD&D for the employee and dependents)
Short and long-term disability
Health Spending Account (HSA)
Transportation benefits
Employee Assistance Program
Time Off/Leave (PTO, Vacation or Sick Leave)
Workplace Type
This is a hybrid position in Baltimore,MD.
Application Deadline
This position is anticipated to close on Jun 30, 2025.
>About TEKsystems:
We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
About TEKsystems and TEKsystems Global Services
We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com.
The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Our client is an OPCO of Exelon, one of the largest Energy providers in the U.S (Mainly East Coast and Mid Atlantic). Exelon as a whole is consistently upgrading/expanding their utility network across all OPCO's tied to various initiatives/government regulations not limited to AMI (Advanced Meter Infrastructure), Grid Modernization, Clean Energy, etc. In order to keep up with pace and demand of these builds, our client leverages an ecosystem of Construction/Engineer vendors and needs to ensure they are providing oversight and QC efforts to make sure work is up to our clients standards and ultimately protect the networks integrity/safety. This is also an effort to hold the Vendors accountable and raise awareness around their metrics on various scorecards. With increased builds, the Quality and Standards department of our client is taking on more business units such as Electrical Distribution, Substations, Gas Transmission, and Fiber (Each QC resource is allocated based on their specialty).
The QC inspector will work on directly with a lead everyday to identify plan and routes of QC (The lead is performing more of the communication with the Construction Vendor but QC inspector also needs to be able to do this). They will then go to various sites and perform Quality Control visual inspections of both Aerial and Underground builds. The Aerial will all be post construction, the underground will be during. They will use Proprietary software called QCI which gives them checklist to evaluate on each job, assess whether the specific scope has passed or failed the various check list, take various photos of work completed, document work and communicate across the various parties involved. Don't just capture only deviations, also capture any work that is structured correctly and associate that to performance metrics. A large portion of this role will be in the field, with some office and home (Very light and situational) documentation.
A Quality Control (QC) Inspector for our client is a high visibility position; therefore, the inspector must always present themselves in a professional manner, with honesty and integrity. A QC Inspector must possess good interpersonal skills and willingness to learn. A QC Inspector is an individual who observes, monitors, and documents the execution of construction work performed in the field by utility and contractors crews. A QC Inspector primarily performs quality inspections on work currently being performed or work that has been recently completed, utilizing established checklists. A QC Inspector will also perform and document field safety audits, utilizing the utility Safety Website. - Candidates for the Overhead QC Inspector positions will have to successfully complete and/or demonstrate knowledge of: utility QC Inspector Qualification Training, Proficiency using the utility Standards (C-Specs), Proficiency using utility maps and locating equipment in the field, Knowledge of utility work practices and procedures, Knowledge of the utility Safety Rule Book and other underground safety rules. Contractor candidates holding current industry underground certifications for performing overhead activities will be evaluated and portions of the above requirements may be waived. Specific Duties and Responsibilities - A QC Inspector's primary duties are (but are not limited to:) Spend 95+% of their time in the field performing QC inspections, Inspection of existing utility facilities such as URD cables, splices, terminations, transformers, and other facilities as required, Observe the construction of URD splices and terminations while being constructed, Document identified deviations in QCI in a timely manner, Conduct and document Safety Audits as required, Attend weekly staff meetings. Must have 3 - 5 years of QC inspection experience in a utility setting.
Skills
osp, construction, utility construction, aerial, underground utilities, gas transmission, design-build
Top Skills Details
osp,construction,utility construction,aerial,underground utilities,gas transmission
Additional Skills & Qualifications
nspector will report to the office on Tuesday at 7:30am (Spring Gardens, Race Street Baltimore), review the days schedule of inspections then travel to the job sites to review the quality of the contractor's construction. Monday - Friday, there will be a morning call everyday at 7:30am then they will follow the same pattern as previous.
5 days a week, 8hrs a day
Gas construction experience on systems is a requirement. Familiarity with our cleints OQ's and Redbook. Ability to use supplied MDT and computer applications.
Quality Inspector overseeing Electric Distribution OH and UG construction
a. Quality captures to ensure construction work is performed to our clients and Regulatory standards and processes. Also documenting and measuring contractor construction performance and metrics
b. Quality Department is currently 6 internal employees, and 5 staff aug employees. Team will be expanding through 2024
No remote availability, inspector to be on site every day overseeing crews. Limited options to work from home possibly 1 day a week if weather is an issue or backlog of information needs to be input into QCI software
d. Microsoft Outlook, AS8 (preferrable), Microsoft Teams
e. For the Electric Distribution position - Experience in distribution construction or quality oversight. For the Gas position - Experience in gas construction or quality oversight
f. Verbal communication skills, ability to deescalate situations
Resources will be driving their own vehicles but will receive mileage reimbursement.
Experience Level
Intermediate Level
Pay and Benefits
The pay range for this position is $32.00 - $43.00/hr.
Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:
Medical, dental & vision
Critical Illness, Accident, and Hospital
401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available
Life Insurance (Voluntary Life & AD&D for the employee and dependents)
Short and long-term disability
Health Spending Account (HSA)
Transportation benefits
Employee Assistance Program
Time Off/Leave (PTO, Vacation or Sick Leave)
Workplace Type
This is a hybrid position in Baltimore,MD.
Application Deadline
This position is anticipated to close on Jun 30, 2025.
>About TEKsystems:
We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
About TEKsystems and TEKsystems Global Services
We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com.
The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Employers have access to artificial intelligence language tools (“AI”) that help generate and enhance job descriptions and AI may have been used to create this description. The position description has been reviewed for accuracy and Dice believes it to correctly reflect the job opportunity.