Overview
On Site
USD 134,679.00 - 158,865.00 per year
Full Time
Skills
Semiconductors
Bridging
Health Care
LinkedIn
Twitter
Product Engineering
Management
New Product Introduction
Production Support
Manufacturing Engineering
Process Improvement
Root Cause Analysis
Mixed-signal Integrated Circuit
Data Analysis
Testing
Materials Science
Physics
Debugging
Sensors
Modeling
Agilent ADS
ADS
Manufacturing
Work In Process
ROOT
Yield Management
ECAD
Process Modeling
Schematics
Electrical Engineering
Failure Analysis
Mechanical Engineering
Integrated Circuit
Internal Communications
IC
Scanning Electron Microscope
SEM
Energy
EDX
FIB
Licensing
Military
Law
Training
Market Analysis
Job Details
About Analog Devices
Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible . Learn more at and on LinkedIn and Twitter (X).
Employer: Analog Devices, Inc.
Job Title: Senior Engineer, Product Engineering (Mfg.)
Job Requisition: R252068
Job Location: San Jose, California
Job Type: Full Time
Rate of Pay: $134,679.00 - $158,865.00/year
Duties:
Manage new product introduction and production support engineering for a specific product or group of products after transfer from design to in-house or outsourced production. Interface with design, process, test, reliability, and manufacturing engineering to solve product issues and production problems. Develop and sustain process improvements to reduce production costs and increase yields. Perform Yield Enhancement root cause analysis and Failure Analysis on a variety of analog and mixed signal integrated circuits. Define problems by identifying failure modes, quantity of material affected, percent fallout, etc. Perform data analysis, problem characterization, fault isolation, and physical failure analysis to determine the root cause of the problem. Support product reliability qualification testing and analysis, and package qualification testing and analysis. Conduct low yield failure analysis for process transfer and product transfer between fabrications.
Partial telecommute benefit (2 days WFH).
Requirements: Must have a Master's degree in Electrical Engineering, Materials Engineering, Physics or related field of study (or foreign education equivalent) and two (2) years of experience as a product engineer or related occupation performing solid circuit debugging and physical failure analysis.
Must also possess the following:
Demonstrated Experience (DE) performing mixed integrated circuit (IC) and sensor modeling and simulation using Candance, Console, and Advanced Design System (ADS);
DE monitoring manufacturing process (Work in Process "WIP"), gathering test and process data for analysis to identify the failure models and potential root causes through shop floor control and yield management system such as ACE, or Excensio;
DE synthesizing ECAD, product datasheets and process design rules for new products and existing products; verifying schematics and layouts to determine electrical properties, and set up the test bench per customer document or failure analysis requirement; and
DE conducting physical non-destructive and destructive analysis using X-Ray, mechanical and chemical de-processing, mechanical cross-sectioning (such as Buehler, RIE, or Elite) on microelectronics or mixed IC, metallographic analysis, Scanning Electron Microscope "SEM", and element analysis (such as Energy Dispersive X-ray "EDX" or FIB).
Experience and skills may be gained during a graduate program
Contact: Eligible for employee referral program. Apply online at and Reference Position Number: R252068.
For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except s, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process.
Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group.
EEO is the Law: Notice of Applicant Rights Under the Law.
Job Req Type: Experienced
Required Travel: No
Shift Type: 1st Shift/Days
Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible . Learn more at and on LinkedIn and Twitter (X).
Employer: Analog Devices, Inc.
Job Title: Senior Engineer, Product Engineering (Mfg.)
Job Requisition: R252068
Job Location: San Jose, California
Job Type: Full Time
Rate of Pay: $134,679.00 - $158,865.00/year
Duties:
Manage new product introduction and production support engineering for a specific product or group of products after transfer from design to in-house or outsourced production. Interface with design, process, test, reliability, and manufacturing engineering to solve product issues and production problems. Develop and sustain process improvements to reduce production costs and increase yields. Perform Yield Enhancement root cause analysis and Failure Analysis on a variety of analog and mixed signal integrated circuits. Define problems by identifying failure modes, quantity of material affected, percent fallout, etc. Perform data analysis, problem characterization, fault isolation, and physical failure analysis to determine the root cause of the problem. Support product reliability qualification testing and analysis, and package qualification testing and analysis. Conduct low yield failure analysis for process transfer and product transfer between fabrications.
Partial telecommute benefit (2 days WFH).
Requirements: Must have a Master's degree in Electrical Engineering, Materials Engineering, Physics or related field of study (or foreign education equivalent) and two (2) years of experience as a product engineer or related occupation performing solid circuit debugging and physical failure analysis.
Must also possess the following:
Demonstrated Experience (DE) performing mixed integrated circuit (IC) and sensor modeling and simulation using Candance, Console, and Advanced Design System (ADS);
DE monitoring manufacturing process (Work in Process "WIP"), gathering test and process data for analysis to identify the failure models and potential root causes through shop floor control and yield management system such as ACE, or Excensio;
DE synthesizing ECAD, product datasheets and process design rules for new products and existing products; verifying schematics and layouts to determine electrical properties, and set up the test bench per customer document or failure analysis requirement; and
DE conducting physical non-destructive and destructive analysis using X-Ray, mechanical and chemical de-processing, mechanical cross-sectioning (such as Buehler, RIE, or Elite) on microelectronics or mixed IC, metallographic analysis, Scanning Electron Microscope "SEM", and element analysis (such as Energy Dispersive X-ray "EDX" or FIB).
Experience and skills may be gained during a graduate program
Contact: Eligible for employee referral program. Apply online at and Reference Position Number: R252068.
For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except s, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process.
Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group.
EEO is the Law: Notice of Applicant Rights Under the Law.
Job Req Type: Experienced
Required Travel: No
Shift Type: 1st Shift/Days
- Actual wage offered may vary depending on work location, experience, education, training, external market data, internal pay equity, or other bona fide factors.
- This position qualifies for a discretionary performance-based bonus which is based on personal and company factors.
- This position includes medical, vision and dental coverage, 401k, paid vacation, holidays, and sick time, and other benefits.
Employers have access to artificial intelligence language tools (“AI”) that help generate and enhance job descriptions and AI may have been used to create this description. The position description has been reviewed for accuracy and Dice believes it to correctly reflect the job opportunity.