CNC Machinist III

CNC Machinist III

Principal Activities

\n
• Review the work order requirements and drawings, obtain fixtures and tools for preparation.
\n
• Set up and operate 4 & 5 axis CNC to perform a variety of machining operations per engineering drawings to meet daily production requirements to trace complex profiles requiring changes in set-up, speeds, feeds and tool angles.
\n
• Set up and operate manual lathes/mills to perform a variety of machining operations i.e. perform single point threading per engineering drawings to meet daily production requirements
\n
• Use manual tools to debur and degrease.
\n
• Set-up and/or operate various drill presses, punch press involving drilling, taping, reaming, countersinking.
\n
• Use jigs and fixtures, block or shim parts to level and align the irregular shaped parts.
\n
• Check for concentricity, formed sections, steps or shoulder to close +/- tolerances of 0.001" or less for faulty operation or defective material.
\n
• Improvise machine set-up to perform non-standard type of work.
\n
• Provide solutions in the absence of standard work holding devices and tooling.
\n
• Rework quality issues into acceptable standards.
\n
• Train entry level machinist.
\n
• Report any problems or difficulties to the supervisor.
\n
• Maintain work area, equipment and supplies in a neat and orderly condition & 6S.
\n
• Following safety procedures and policies.
\n
• Perform other work-related duties as assigned.
\n
• Work with tooling vendors/MEs to optimize tooling.
\n

\n

Candidate Requirements

Knowledge, Skills & Abilities

\n
• 6~8 years of experience in machining
\n
• Able to set up and operate 4 & 5 axis CNC
\n
• Advanced knowledge of G codes and M codes
\n
• Able to read complex drawings and blueprints, calculate or determine dimensions not given. i.e. true position, datum points, etc.
\n
• Able to work independently and do own set-ups.
\n
• Able to use measuring equipment, including CMM, optical comparator etc.
\n
• Data input skills / computer skills.
\n
• Advanced PLC knowledge of controller to edit, write, trouble shoot programs.
\n
• Knowledge of operating manual secondary equipment, drill press, saw, punch press, etc.
\n
• Have the advanced knowledge to hold tolerance +/- 0.0001.
\n
• Advanced knowledge of various metals to optimize tooling to OEM specifications.
\n
• Advanced mathematical ability.
\n
• Proficiency in problem solving and trouble shooting skills
\n
• Lifting up to 50lbs
\n
• EHS awareness.
\n
• Flexibility in shift times.
\n
• Flexibility in working overtime.
\n

\n
Education

• HS Diploma/GED or equivalent Associate's / Technical Degree (two years) is preferred.

\n
Other

• US Citizen

\n
CIRCOR is an EEO Employer

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.