ENGINEER/SCIENTIST

Summary

This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

Help

• You will serve as a Next Generation Missile Defense Systems Engineer within the Warfare Architecture and Engineering Division, Integrated Combat Sytems Department of Naval Surface Warfare Center Dahlgren Division.
• You will conduct engineering analysis that results in the identification and recommendation of warfare systems to satisfy required capabilities for the surface fleet.
• You will consult with stakeholders on software system design and maintenance, document work through technical reports and specifications, and coordinate with architects and developers to oversee the development of design solutions.
• You will define project scope and objectives, develop architectures and requirements for warfare systems, conduct key systems engineering efforts, and develop integration options for future systems.
• You will implement Agile development, DevSecOps, Data Analytics, and Model Base System Enginering (MBSE) best practices for future warfare system development.
• You will solve problems, analyze issues, research technologies to meet customer requirements, and contribute expert input to implementation and procedures.

Requirements

Help

Conditions of employment

• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

For the ND-03: Your resume must also demonstrate at least one year of specialized experience at or equivalent to the ND-02 pay band (GS-05 through GS-08 equivalency) in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: as a professional engineer or scientist applying basic systems engineering principles in support of engineering assignments to solve complex technical problems utilizing engineering techniques, procedures and methods.

For the ND-04: Your resume must also demonstrate at least one year of specialized experience at or equivalent to the ND-03 pay band (GS-09 through GS-11 equivalency) in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: as a professional engineer or scientist applying systems engineering principles to research, analyze, interpret, evaluate and carry out difficult but conventional assignments. Examples of qualifying experience may include (1) experience with systems engineering analysis and design; (2) experience with agile development, data analytics and Model Base System Engineering (MBSE) tools, (3) knowledge of conventional systems engineering tools, and other available tools to execute assigned tasking.

Additional qualification information can be found from the following Office of Personnel Management website:

;br>
;br>
;br>
;br>
This is an interdisciplinary position and may be filled by a General Engineer (0801-series), an Operations Research Analyst (1515-series), a Mathematician (1520-series), or a Computer Scientist (1550-series) depending upon the qualifications of the candidate. Applicants in positions with occupational series other than those listed (0801, 1515, 1520 and 1550) may apply; however, you must apply directly to the series listed in this vacancy that is most applicable to your qualifications.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet at least one of the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

For the 0801 Professional Engineering Series:

Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

Combination of education and experience college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related curriculum Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

For the 1515 Professional Operations Research Series:

Degree: in operations research; or at least 24 semester hours in a combination of operations research, mathematics, probability, statistics, mathematical logic, science, or subject-matter courses requiring substantial competence in college-level mathematics or statistics. At least 3 of the 24 semester hours must have been in calculus.

For the 1520 Professional Mathematics Series:

Degree: mathematics; or the equivalent of a major that included at least 24 semester hours in mathematics.

OR

Combination of education and experience courses equivalent to a major in mathematics (including at least 24 semester hours in mathematics), as shown above, plus appropriate experience or additional education.

For the 1550 Professional Computer Science Series:

Degree: computer science; or bachelor's degree with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus. All academic degrees and course work must be from accredited or pre-accredited institutions.

Additional information

This position is part of the Warfare Centers Personnel Demonstration Project. The ND-4 pay band encompasses positions equivalent to GS-12 and GS-13. The ND-3 pay band encompasses positions equivalent to GS-09 through GS-11.

This announcement uses the STRL Bachelors or Advanced Degree direct hire authority to recruit and appoint qualified candidates to certain positions in the competitive service.

Vacancies filled from this announcement may be filled at any grade level listed.

If selected below the full performance level, you may be noncompetitively promoted to the next higher grade level after meeting all regulatory requirements, and upon the recommendation of management. Promotion is neither implied nor guaranteed.

This position is covered by the Department of Defense Priority Placement Program.

Several vacancies may be filled.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: ;br>
Veteran's preference does not apply when selecting individuals under this specific hiring authority. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.

Expand Hide additional information

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

Benefits

Help

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.