Manufacturing engineering Jobs in Dallas, TX

Refine Results
1 - 20 of 75 Jobs

Manufacturing Engineering Resource Programmer III

Textron

•

Grand Prairie, Texas, USA

Full-time

Summary of Work Performed: Under the general supervision of a supervisor or an employee of equal or higher rank, Mfg. Eng. Resource Programmer is responsible for the effective design of manufacturing resources including Computer Aided Manufacturing (CAM) numerical controlled (NC) programs, Manufacturing Computer Aided Design (MCAD) tools/fixtures, loft patterns, and operational models with associated 2D drawings. Must have knowledge of shop production and processing operations. Work in accordan
Posted 1 day ago | Updated 13 hours ago

Manufacturing Engineer

PPG Industries, Inc.

•

Grand Prairie, Texas, USA

Full-time

PPG Aerospace is the world's leading supplier of aircraft transparencies serving worldwide markets with the full range of product designs. Manufacturing is a complex, job-shop environment in which simultaneous production is in progress on hundreds of product designs using a wide variety of complex technologies. Products are produced in relatively low volume and have very high unit value. New product introductions occur continuously. You will report to the Manager of Manufacturing Engineering and
Posted 7 days ago | Updated 12 hours ago

Manufacturing Engineer

Dean Technology, Inc

•

Addison, Texas, USA

Full-time

Job Type Full-time Description MANUFACTURING ENGINEER Department: Engineering Reports To: Product Manager CKE/Suppression Products Classification: Exempt Location: Addison, TX DESCRIPTION: Provide engineering support to develop, direct, and implement the processes, methods, and equipment used in the manufacturing department to ensure the company product lines are manufactured in the most cost effective and timely manner while assuring the highest quality. RESPONSIBILITIES: Manage key projec
Posted 17 days ago | Updated 9 hours ago

Manufacturing Engineer II

Oil States Industries

•

Arlington, Texas, USA

Full-time

Oil States is looking for candidates for the position of Manufacturing Engineer II. This position is on-site full time and located in Arlington, TX 76001. CITIZENSHIP REQUIREMENTS - By contractual requirements, the project and job location for this position requires that all persons establish proof of ship. Dual Citizenship (ship and citizenship of some other country) cannot be accepted. You will be required to provide original or certified copies of documents establishing your citizenship prio
Posted 20 days ago | Updated 13 hours ago

Manufacturing Engineer II

Oil States Industries Inc

•

Arlington, Texas, USA

Full-time

Oil States is looking for candidates for the position of Manufacturing Engineer II. This position is on-site full time and located in Arlington, TX 76001. CITIZENSHIP REQUIREMENTS - By contractual requirements, the project and job location for this position requires that all persons establish proof of ship. Dual Citizenship (ship and citizenship of some other country) cannot be accepted. You will be required to provide original or certified copies of documents establishing your citizenship prio
Posted 22 days ago | Updated 7 hours ago

Manufacturing Engineer Senior

Lockheed Martin

•

Grand Prairie, Texas, USA

Full-time

Job ID: 694398BR Date posted: Jun. 03, 2025 Description:Overview You will be the Manufacturing Engineer, Senior for the Precision Fires Rate Tooling team. Our team drives the successful execution of rate tooling contracts, supporting Missiles and Fire Control's production capacity growth for Precision Fires programs, including GMLRS, PrSM, and ATACMS. What You Will Be DoingAs the Manufacturing Engineer, Senior, you will support rate tooling proposals, program baseline activities, and contract
Posted 11 days ago | Updated 17 hours ago

Associate Director, Engineering (API manufacturing & Biocatalysis)

Merck & Company Inc

•

Remote or Rahway, New Jersey, USA

Full-time

Job Description About the Role: As a Technical Lead, you will report into Director, Chemical Technical Operations, External Manufacturing API Technology, and play a pivotal role in managing the technical interface between our company and our External Partners (EP) for Active Pharmaceutical Ingredients (API) and intermediates. You will be responsible for providing process support, resolving production issues, evaluating process change requests, and proactively managing process and technical risk
Posted 12 days ago | Updated 8 hours ago

Mechanical Engineer- Oil & Gas Industry

DBSI Services

•

Carrollton, Texas, USA

Full-time

Benefits: 401(k) 401(k) matching Relocation bonus Job Title: Mechanical Engineer Location: Carrollton, TX Proficient with Completion Tools experience- Safety Valve, Sand control, MathCAD, 3d CAD software Solidworks. Job Description & Skill Requirement: Working in Downhole Tool components (O&G) development projects under general supervision assists in analysis, modification and design of products and services for assigned projects which require working. knowledge of materials, components and
Posted 35 days ago | Updated 8 hours ago

Manufacturing Engineer Sr.

Lockheed Martin

•

Arlington, Texas, USA

Full-time

Job ID: 695634BR Date posted: Jun. 12, 2025 Description:You will be the Manufacturing Engineer for the PAC-3 Command Launch System (CLS) Program Manufacturing Engineering team. Our team supports all aspects of manufacturing and assembly of the PAC-3 CLS through make sites and external suppliers. This work is essential for the program to execute current contract requirement as well as capture future business for the program. The position will serve as a Manufacturing Engineering point of contact
Posted 2 days ago | Updated 7 hours ago

Manufacturing Engineer

Lockheed Martin

•

Arlington, Texas, USA

Full-time

Job ID: 691396BR Date posted: May. 07, 2025 Description:Overview You will be the Manufacturing Engineer for the PAC-3 International Manufacturing Engineering Team within IAMD. Our team is responsible for reviewing, redacting, and releasing Manufacturing Data Package (MDP) elements, as well as coordinating the ordering, fabrication, and delivery of Special Tools and Special Test Equipment. What You Will Be Doing As the Manufacturing Engineer, you will be responsible for developing and implement
Posted 3 days ago | Updated 23 hours ago

Senior Optics Manufacturing Engineer - onsite Richardson, TX

RTX

•

Richardson, Texas, USA

Full-time

Date Posted: 2025-06-03 Country: United States of America Location: TX231: Richardson 1601 North Plano Road , Richardson, TX, 75081 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Security Clearance: None/Not Required At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowne
Posted 12 days ago | Updated 9 hours ago

Lead Application Developer (R3239)

Shield AI Inc

•

Dallas, Texas, USA

Full-time

Founded in 2015, Shield AI is a venture-backed defense technology company with the mission of protecting service members and civilians with intelligent, autonomous systems. Its products include Hivemind Enterprise-EdgeOS, Pilot, Commander, and Forge-as well as V-BAT and Sentient Vision Systems (wide-area motion imaging software). With offices in San Diego, Dallas, Washington, D.C., Abu Dhabi (UAE), Kyiv (Ukraine), and Melbourne (Australia), Shield AI's technology actively supports U.S. and allie
Posted 22 days ago | Updated 8 hours ago

Controls Systems Engineer IV (Electronics)

Rheem Manufacturing Company

•

Lewisville, Texas, USA

Full-time

Job Description The Controls Systems Engineer IV is responsible for planning, implementing/executing, and documenting system engineering activities for Rheem electronic controls. This position will serve our Air Division located in Lewisville, TX (Hybrid). Responsibilities Active engagement with software, hardware, test, and product development teams over the entire product life cycle to ensure that system engineering work products are planned, documented, and completed.Document / Define / Updat
Posted 12 hours ago | Updated 5 hours ago

Senior Engineer, Electrical Failure Analysis (R3520)

Shield AI Inc

•

Dallas, Texas, USA

Full-time

Founded in 2015, Shield AI is a venture-backed defense technology company with the mission of protecting service members and civilians with intelligent, autonomous systems. Its products include Hivemind Enterprise-EdgeOS, Pilot, Commander, and Forge-as well as V-BAT and Sentient Vision Systems (wide-area motion imaging software). With offices in San Diego, Dallas, Washington, D.C., Abu Dhabi (UAE), Kyiv (Ukraine), and Melbourne (Australia), Shield AI's technology actively supports U.S. and allie
Posted 21 days ago | Updated 8 hours ago

ASME Engineer III - Part-Time

Daikin Applied

•

Minnesota, USA

Part-time

Make your mark at the world's largest HVAC company Daikin Applied is seeking an ASME Product Engineer . The ASME Product Engineer is responsible for ensuring the quality and compliance of metal-fabricated products with ASME standards. Come be a part of an exciting journey at Daikin Applied, where innovation and excellence drive our every endeavor! Location: Remote in the USA What you will do: Develop technical solutions to complex problems which require the regular use of ingenuity and creat
Posted 3 days ago | Updated 8 hours ago

Principal Casting Engineer (P4) - Remote

RTX Corporation

•

Remote or Michigan, USA

Full-time

Date Posted: 2025-05-20 Country: United States of America Location: PW117: Michigan Remote Remote Location , Remote City, MI, 49503 USA Position Role Type: Remote U.S. Citizen, U.S. Person, or Immigration Status Requirements: Security Clearance: None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it
Posted 7 days ago | Updated 8 hours ago

Material Review Board Engineer - AWW (P4) - Hybrid

RTX Corporation

•

Remote or Middletown, Connecticut, USA

Full-time

Date Posted: 2025-04-25 Country: United States of America Location: PW102: Middletown Aircraft Rd P.O. Box 611, Middletown, CT, 06457 USA Position Role Type: Hybrid U.S. Citizen, U.S. Person, or Immigration Status Requirements: Security Clearance: None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building, and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive
Posted 20 days ago | Updated 8 hours ago

Lead Manufacturing Engineer (Remote)

Westinghouse Electric Company, LLC

•

Remote or Hopkins, South Carolina, USA

Full-time

Are you interested in being part of an innovative team that supports Westinghouse's mission to provide clean energy solutions? At Westinghouse, we recognize that our employees are our most valuable asset and we seek to identify, attract and recruit the most qualified talent while recognizing and encouraging the value of diversity in the global workplace. About the role: The Manufacturing Engineering and Programs organization is a newly formed group within Global Manufacturing (GMFG). As a Glob
Posted 15 days ago | Updated 19 hours ago

ElectroMechanical Engineer III, Cable Design

Lockheed Martin Corporation

•

Remote or Littleton, Colorado, USA

Full-time

Job Description Join Our Team as an Electromechanical Engineer where you will work on the development of a sophisticated state-of-the-art avionics product in a world class Integrated Product Development environment. Location: Although this position does support some teleworking; the selected candidate will need to be located near our Lockheed Martin Space facility in: Littleton CO, and be expected to work in the office as needed and as appropriate. What does this role look like? Join us at L
Posted 25 days ago | Updated 8 hours ago

E-7A Configuration and Data Management Engineer (Entry-Level or Associate)

Boeing Company

•

Remote or Tukwila, Washington, USA

Full-time

E-7A Configuration and Data Management Engineer (Entry-Level or Associate) Company: The Boeing Company Boeing Defense & Space (BDS) is currently looking for a Product Lifecycle Management Engineer (Entry-Level or Associate) to join the USAF E-7A team located in Tukwila, WA. The selected candidate will join a team of PLM professionals performing a variety of PLM functions. The ideal candidate will have experience / practice in any of the following areas: assisting in hardware and software confi
Posted 2 days ago | Updated 8 hours ago