fmeca Jobs

Refine Results
41 - 60 of 688 Jobs

Quality Project Manager

Indotronix International Corp

•

Oneonta, New York, USA

Full-time

Title: Quality Project Manager Location: Oneonta, NY, 13820 Duration: 7+ Months Contract Pay rate: $42/hr W2 Summary: This facility is undergoing a Quality System Transformation from ISO 9001 to ISO 13485. Looking for minimum of 2 years Project Management experience with managing this type of transition. ETQ experience on top of this will set a candidate apart from others. Bachelors required (though manager would consider additional years experience or accreditations in lieu of Bachelors). Job D
Easy Apply
Posted 11 days ago

Medical Device Manufacturing Engineer

PrimaSoft Inc

•

Plymouth, Minnesota, USA

Full-time, Part-time, Third Party, Contract

Position: Medical Device Manufacturing Engineer Location: Plymouth, MN Key Responsibilities: Lead the design, development, and optimization of manufacturing processes for medical devices. Collaborate with R&D teams to transition new products from design to manufacturing. Ensure compliance with FDA regulations (21 CFR 820) and ISO 13485 standards. Develop and implement process validation and qualification plans. Perform root cause analysis for process issues and implement corrective action
Easy Apply
Posted 28 days ago | Updated 26 days ago

Biomedical EngineerJob title is Biomedical Engineer

Tranzeal, Inc.

•

Tucson, Arizona, USA

Contract

Role Description Focus: Integration of software with hardware, requirement writing, testing, and risk analysis Tool Used: Retina for requirements, risk verification, and validation Responsibilities Requirements Management: Write and refine requirementsDevelop test cases to verify requirementsValidation & Testing: Validate customer requirementsConduct failure mode effects analysis (FMEA) from a software perspectiveIntegration: Integrate software with hardware systemsAddress software bugs and defe
Easy Apply
Posted 11 days ago | Updated 5 days ago

Electrical Engineer - Wire Harness

Tata Technologies - HQ

•

Decatur, Illinois, USA

Full-time

Job Description Typical task breakdown: Design wire harness routings, support detailing, and checking of prints. Present design reviews Collaborate with suppliers Support, cost rollups, FMEA, TFCs, Supplier collaboration, etc Education & Experience Required: Bachelor s degree in electrical or mechanical engineering 3+ years of experience Master s Degree and/or PHD with 1+ years experience Technical Skills (Required) Extensive Creo, Teamcenter experience FMEAs Experience in reading electrical dra
Easy Apply
Posted 6 hours ago

Mechanical Engineer 2

Insight Talent Solutions

•

Mossville, Illinois, USA

Full-time

Mechanical Engineer Full Time Mossville, IL Job Summary: We are seeking a hands-on Mechanical Engineer to join our team in Mossville, IL. The ideal candidate will have a strong foundation in mechanical engineering principles and a proven track record in the automotive industry. This role requires a collaborative individual with excellent problem-solving skills and a passion for innovation. Qualifications: Minimum of 3 years of experience in the automotive industry.Failure analysis or root cause
Easy Apply
Posted 1 day ago | Updated 1 day ago

Senior Product Quality Engineer - AEC-Q100

Ztek Consulting

•

San Jose, California, USA

Full-time

Role :- Senior Product Quality Engineer - AEC-Q100 Location :- Onsite role in San Jose, CA Job Description: Directly interface with automotive customer quality engineers to collaborate on product quality topics Directly interface with internal teams to address product development quality Lead 8D investigations for quality issues and work to deploy systemic corrective actions Create customer facing 8D reports Assist Sales team on customer quality matters Support customer PPAP and documentat
Easy Apply
Posted 7 days ago | Updated 5 days ago

Design Release Engineer - Body Control Modules

Stellantis

•

Auburn Hills, Michigan, USA

Full-time

TITLE : Design Release Engineer - Body Control Modules DUTIES : Design and develop CAN and LIN network based user control modules (BCM / CBC / Next Generation). Interface with Upper Layer Software Factory and to run a development schedule to keep deliverables on time. Create and manage change notices for product changes and coordinate all validation with platforms and suppliers on all new feature development and customer satisfaction improvements. Understand the DVP&R Process, as well as DFMEA
Posted 1 day ago | Updated 2 hours ago

Sr. Manufacturing Engineer

Brady Corporation

•

Brown Deer, Wisconsin, USA

Full-time

The Manufacturing Engineer is responsible for manufacturing processes and their improvement, resolution of complex manufacturing process issues, and providing leadership and guidance to technicians and/or hourly associates that may not report directly to the incumbent. Influences key associates to promote participation and cooperation in process development/improvement initiatives. Ensures conformance with and application of policies and procedures. Designs, deploys and validates new manufactur
Posted 8 days ago | Updated 23 hours ago

Senior Quality Engineer (Manufacturing) :: Need only local to Plano TX:;

1 Point System

•

Plano, Texas, USA

Full-time

Senior Quality Engineer (Manufacturing) Location: Plano, TX area (25 miles outside of Plano, TX, 5 days onsite) Interview: Teams Meetings (2) then potential onsite interview (client pays) Quality Engineer (Manufacturing) THIS IS NOT SUPPLYCHAIN/SUPPLIER OR SOFTWARE QA How Many Years With ISO 9001: FMEA: CAPA: ERP Systems: SMT or PCB: Lean Manufacturing: Documentation Control: Statistical Process Control (SPC): DO you have an ISO CERT: Job Details/Requirements Position Summary: We are seekin
Easy Apply
Posted 5 days ago | Updated 5 days ago

SAP QM Consultant

K2 Partnering Solutions, Inc.

•

Remote

Contract

SAP QM Consultant (m/f/d) Start: asap Duration:End of June 2025++ (3 days/ week) Location:remote Language: German Description: Discrete Manufacturing or Automotive Industry background (Process Industries will not suit) Current Project Phase: Explore with F2S Workshops and requirements gathering Next steps: Solution design and prototyping in value prototyping system Core QM components in scope: Audit Management currently non SAP FMEA currently non SAP Control Plan currently partly non SAP Inspec
Easy Apply
Posted 29 days ago

Chip Desgner/Packaging

eTeam, Inc.

•

Santa Clara, California, USA

Contract

Job Title: Chip Desgner/Packaging Job Location: Santa Clara, CA (Hybrid) IC Packaging & Chiplet Integration : 2.5D/3D packaging, flip-chip bonding, TSV, hybrid bondingSemiconductor Processing : BEOL/FEOL integration, advanced interconnects, thin-film deposition (PVD, PECVD, ALD, CVD)Design & Simulation : Siemens NX, Cadence, ANSYS, EasyEDA, ThermoCalcHigh-Speed I/O & Signal Integrity : Impedance control, power/signal integrity, substrate optimizationProcess Development & Metrology : DOE, SPC,
Easy Apply
Posted 5 days ago

Product Quality Engineer

Stellantis

•

Warren, Michigan, USA

Full-time

The Quality organization is currently seeking a solutions-oriented Product Quality Engineer (PQE) to join the Quality team at Warren Truck Assembly Plant (WTAP) in Warren, Michigan. This position will be concentrated in the field of Mechanical Engineering and will be involved in working with various commodities within the entire vehicle architecture. This position offers the selected candidate an opportunity to be an integral part of a company whose focus is to change the automotive landscape. T
Posted 1 day ago | Updated 2 hours ago

Sr Process Engineer -Paint

Lucid Group, Inc.

•

Casa Grande, Arizona, USA

Full-time

Leading the future in luxury electric and mobility At Lucid, we set out to introduce the most captivating, luxury electric vehicles that elevate the human experience and transcend the perceived limitations of space, performance, and intelligence. Vehicles that are intuitive, liberating, and designed for the future of mobility. We plan to lead in this new era of luxury electric by returning to the fundamentals of great design - where every decision we make is in service of the individual and en
Posted 1 day ago | Updated 4 hours ago

Industrial Automation Engineer

TruEvan Technologies Inc

•

Cambridge, Ontario, Canada

Contract

Job Title Sr Design Lead (Mech) - Industrial Automation Location: Cambridge, ON (Day 1 Onsite) Job Type: Contract/Fulltime Job Description: Looking for a seasoned engineering leader with a proven track record in the Delivery of projects in the design & and simulation of Manufacturing lines Preferred candidate with the following skills Perform engineering calculations for machine and tool designs, including strength, speed, horsepower, temperature, pressure, and force.Analyze engineering drawings
Easy Apply
Posted 19 days ago | Updated 19 days ago

Senior Reliability Engineer

Ztek Consulting

•

Greensboro, North Carolina, USA

Full-time

Role: Senior Reliability Engineer Work location: Greensboro, NC Must Have Technical/Functional Skills: Senior Reliability Engineer to oversee the reliability lifecycle of our products, spanning from concept through design, development, manufacturing, field operations, and returns. The Senior Reliability Engineer will implement Design for Reliability (DFR) tools to enhance reliability at every stage of product development, ensuring alignment with program Reliability goals as outlined in the Reli
Easy Apply
Posted 5 hours ago

Manufacturing Engineer I

Watlow

•

Hannibal, Missouri, USA

Full-time

Working at Watlow Watlow is a global technology and manufacturing leader who provides world class engineering expertise through innovative thermal products and systems, enabling our customers to thrive. We are making a positive impact every day as our solutions enrich the lives of people everywhere. We have been providing breakthrough thermal solutions for nearly a century. Our corporate values guide us uncompromisingly to always do the right thing, continually learn and improve, respect everyon
Posted 1 day ago | Updated 2 hours ago

Healthcare Work Systems Engineer/Human Factors Specialist

Ohio State University

•

Dublin, Ohio, USA

Full-time

Screen reader users may encounter difficulty with this site. For assistance with applying, please contact If you have questions while submitting an application, please review these frequently asked questions. Current Employees and Students: If you are currently employed or enrolled as a student at The Ohio State University, please log in to Workday to use the internal application process. Welcome to The Ohio State University's career site. We invite you to apply to positions of interest. In o
Posted 1 day ago | Updated 5 hours ago

Manufacturing Engineer

Jobot

•

Plainville, Connecticut, USA

Full-time

Full-Time & Direct Hire Manufacturing Engineer needed for elite aerospace innovation experts! This Jobot Job is hosted by: James Thai Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. Salary: $90,000 - $110,000 per year A bit about us: Based in Plainville, CT 06062, we engineer the future of flight with precision, passion, and cutting-edge technology. As a global leader in complex aerospace engine components, we deliver excellence where every micron
Posted 1 day ago | Updated 1 hour ago

Plant Support Engineer - Mechanical

Vistra Corp

•

Oak Harbor, Ohio, USA

Full-time

If you have what it takes to become part of the Vistra family and would like to start a promising career with a global leader, take a look at the exciting employment opportunities that are currently available and apply online. Job Summary The eFIN Team is staffed with experienced engineers across a range of mechanical, civil, electrical, and I&C disciplines, and generally serves as the initial point of contact for all emergent and near-term engineering support. Plant Support Engineer for elect
Posted 8 days ago | Updated 1 hour ago

Manufacturing Electrical Engineer

ConsultNet, LLC

•

Greenwood, Mississippi, USA

Full-time

Manufacturing Electrical Engineer Location: Greenwood, MS (On-site) Direct-Hire Salary Target: $90k-110k Job Description: The Manufacturing Electrical Engineer will play a key role in developing and enhancing electromechanical products within a dynamic manufacturing environment. This role involves collaborating with cross-functional teams to troubleshoot, optimize, and implement quality improvements for electrical and electromechanical systems. The ideal candidate will have a strong foundation
Easy Apply
Posted 1 day ago | Updated 4 hours ago