SummaryThe Structures and Propulsion Branch conducts research to advance scientific knowledge to establish an operational environment that is free of accidents and fatalities. This is achieved by continuously improving the scientific understanding of aviation propulsion systems, atmospheric hazards such as aircraft icing, new structural materials in aircraft, and the necessary support to maintain older aircraft for safe operations.
Learn more about this agencyDutiesHelp
- Provide programmatic and technical support to the Aircraft Icing Research Program. This program conducts research on structural airframe icing in flight, ground deicing, and anti-icing prior to takeoff, and engine compressor icing due to the ingestion of ice particles into the engine core.
- Perform experimental and analytical research to provide data and information that can be used in the development of physical models that represent the trajectory, impact, adhesion, accretion, and the release of ice crystal icing within a turbine engine compressor.
- Works with other FAA colleagues to advance the safety of civil aviation in related propulsion areas.
- Performs computational modeling in support of the Aircraft Icing Program and other research programs within the Aviation Research Division. This includes working on division-wide research initiatives by leading cross organizational teams and applying computational modeling, predictive analytics, data science, advanced statistical methods, aerospace and/or system engineering, and any multi-disciplinary scientific approach as needed by the Aviation Research Division.
Called upon to provide leadership for highly complex and challenging activities under the minimal direction of a manager or executive. May act as a technical expert to develop new and innovative concepts, approaches, methodologies, techniques, and policies, or as a senior project manager or team leader for large, challenging work activities.
Applies experience and comprehensive knowledge of general engineering principles, theories, and concepts, as well as an understanding of new technologies and methodologies, to perform critical tasks which require the development of new concepts or innovative approaches. Identifies and resolves highly complex problems or issues which often cross organizational boundaries and impact on the accomplishment of FAA's strategic objectives. Also predicts potential issues and proposes recommendations for preventive action. Typical assignments may include: system design and integration; extensive research; and direct responsibility for project program management.
Applies knowledge of FAA's policies and objectives to identify, define, and organize work for multiple work activities. Acquires and allocates resources to accomplish work activities within established schedules.
Contacts are internal and external. Often represents FAA as the primary technical authority for major projects, programs, and other areas of FAA responsibility. Formulates and recommends organizational reports or policies for internal and external audiences.
Broad policies and objectives provide general guidance for addressing issues, but almost always require the development of new and innovative approaches. Often develop new policies, procedures, and approaches taking into consideration FAA policies, government-wide rules and regulations, and industry standards. Develops innovative approaches to attain organizational objectives and optimize resources. Conceives, plans, and conducts studies involving complex issues and unique problems. Seeks to continually learn from these duties and work with supervisor to ensure processes, methods, and systems applied are improved upon for future phases and shares with colleagues and other collaborators.
Work is reviewed rarely, typically though status reports and at project completion, to ensure technical compliance and alignment with the requirements of the project or other work activity, final work is typically reviewed for success in achieving planned results.
RequirementsHelp
Conditions of employment- ship is required.
- Selective Service Registration is required for males born after 12/31/1959.
- Must submit an SF50 (See Required Documents).
- This position has a positive education requirement. Transcript(s) required.
QualificationsTo view the complete OPM qualification standard for the Group Coverage Qualification Standard for General Engineer, Series 801, please refer to:
;br>
BASIC REQUIREMENTS:A. Degree:Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
To qualify for this position you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV-I, FG/GS 13. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position.
Specialized experience is: Experience leading experimental and analytical research on structural airframe icing in flight, ground deicing, and anti-icing prior to takeoff, and engine compressor icing due to the ingestion of ice particles into the engine core.
Qualification requirements must be met by the closing date of this vacancy announcement.
The selecting official may decide to interview all, some or none of the candidates referred for consideration.
EducationThis position has a positive education requirement: Applicants must submit a copy of their college or university transcripts(s) and certificates by the closing date of announcement to verify qualifications. If selected, an official transcript will be required prior to appointment. You may upload these documents with your application in USAJOBS or fax it to fax number provided in the announcement (please include announcement number on each page).
Failure to do so will result in loss of consideration.Schools must be accredited by an accrediting institution recognized by the U.S. Department of Education. Accreditation may be verified at the following website: ;br>
Foreign education must be evaluated by a private professional organization specializing in interpretation of foreign education credentials or an accredited U.S. educational institution in terms of equivalence to a degree acquired at an American college or university. A copy of the evaluation results must be included, otherwise your foreign education will not be considered.
Preview job questionnaire
Make sure your resume includes detailed information to support your qualifications and answers to the job questionnaire.
Additional informationWe may use this vacancy to fill other similar vacant positions.
Position may be subject to a background investigation.
A one-year probationary period may be required.
The person selected for this position may be required to file a financial disclosure statement within 30 days of entry on duty. FAA policy limits certain outside employment and financial investments in aviation-related companies. ;br>
As a part of the Federal-Wide Hiring Reform Initiative (streamlining the hiring process), the FAA is committed to eliminating the use of the Knowledge, Skills and Ability (KSA) narratives from the initial application in the hiring process for all announcements. Therefore, as an applicant for this announcement, you are NOT required to provide a narrative response in the text box listed below each KSA.
In lieu of providing a KSA narrative response in the text box listed below each KSA, in your work history, please include information that provides specific examples of how you meet the response level or answer you chose for each KSA. Your work history examples should be specific and clearly reflect the highest level of ability. Your KSA answers will be evaluated further to validate whether the level that you selected is appropriate based on the work history and experience you provided. Your answers may be adjusted by a Human Resource Specialist as appropriate.
Eligible applicants meeting the minimum qualification requirements and selective factor(s), if applicable, may be further evaluated on the Knowledge, Skills and Abilities (KSA) listed in the announcement. Based on this evaluation, applicants will be placed in one of the following categories: score order, category grouping, or alphabetical and referred to the selecting official for consideration.
Links to Important Information: Locality Pay, COLA
Expand Hide additional information
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
BenefitsHelp
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Never miss an opportunity! Create an alert based on the job you applied for.
