Search Jobs | Dice.com

5 results (1 new)

Group by company

Electrical Engineer, Protection

FirstEnergy

Brecksville, Ohio • Today

Full-time

Electrical Engineer, Protection and Controls R&D

Fluidstack

Remote or Austin, Texas • Today

Full-time

USD 210,000.00 - 300,000.00 per year

Electrical Engineer

Crane Payment Innovations

Akron, Ohio • Today

Full-time

Substation Protection & Controls Engineer III

Revamp Engineering

Remote • Today

Full-time

USD 110,700.00 - 137,300.00 per year

Staff Electrical Engineer - Protection Applications (Ohio)

Burns & McDonnell

Akron, Ohio • Today

Full-time

USD 110,000.00 - 165,000.00 per year

Job Details

Skills

Technical Support
Budget
Communication
Transformer
Modeling
RF
Collaboration
SCADA
Corrective And Preventive Action
RFC
Distribution
Regulatory Compliance
NERC
Management
Research
Presentations
Decision-making
Apache Storm
Science
Mechanical Engineering
Electrical Engineering
Service Desk

Summary

Job Description

Responsibilities include:

Providing technical support and guidance to develop transmission and sub-transmission infrastructure projects, plans and capital budgets to maintain the reliability and integrity of the FE transmission protection system.
Developing protective relay design specifications for transmission line and substation projects for use by Design Engineers in developing construction implementation packages. This includes specifying the types of protection schemes to be employed including specific details on relay models and communication architecture, instrument transformer selection, input and output contact assignments, etc.
Performing timely completion of modeling of the transmission system for short circuit calculation, relay modeling and coordination, breaker duty calculations and fault locating ensuring compliance with NERC, RF and FE protection criteria.
Developing relay settings for new and existing protection schemes. This involves performing relay setting coordination studies through the use of "time-current coordination" curves, "resistance-reactance" (R-X) diagrams, and step-distance diagrams, as well as the utilization of the short circuit, one-line, coordination graphics, relay checking and system simulator modules of the CAPE (Computer Assisted Protection Engineering) software program.
Participating in the peer review, electronic issuance, as-left verification and retention of all protection settings through the use of the company's setting management system - PowerBase
Performing timely analysis of automatic tripping of the transmission and sub-transmission systems. Gathering and analyzing SCADA alarm data, relay targets, digital fault recorder and relay event records and documents the findings in the ED Outage Analysis (EDOA) system. Following up on incorrect operations with work requests and corrective action plans to field personnel. Documenting findings and status of corrective action plans periodically to FE management and RFC.
Performing studies related to new load and generation interconnection facilities attaching to the assigned area
Performing transmission protection activities with the FE operating companies (distribution), other utilities, nonutility generation, the Regional Transmission Organization, and Reliability Councils
Following established procedures and retaining evidence to support compliance with the various NERC Protection and Control (PRC) Reliability Standards
Providing staff assistance to management and higher levels of professionals, as needed
Conducting technical research; Compiling and analyzing moderately complex data; Solving practical problems
Preparing technical reports and summaries; Making presentations when necessary
Demonstrating a solid commitment to all aspects of safety
Meeting customer needs by providing sound service and responsiveness.
Exercising sound decision making by developing alternatives and recommendations to technical work processes
Supporting FE storm restoration processes including performing assigned field storm roles during significant system disturbances

An employee hired at the Engineer IV level will be expected to perform all of the above responsibilities with more proficiency, and in a more independent manner. Further, the Engineer IV level employee will be assigned additional responsibilities related to those above.

Engineer II Qualifications include:

Bachelor of Science degree in Electrical Engineering (BSEE, BSCE, BSME) from an ABET accredited institution is required. Acceptable alternatives are: (1) a Professional Engineer's (PE) License (2) a Bachelor of Science degree in Engineering Technology from an ABET accredited institution (3) a Bachelor's degree in Electrical, Civil or Mechanical Engineering or technical field of study (non-ABET) plus an advanced degree in Electrical, Civil or Mechanical Engineering from a university with an ABET accredited Bachelor's program. Electrical Engineering is preferred.
A Fundamentals of Engineering (FE) Certificate is preferred.
Minimum of 2 (two) years of Engineering experience is required.

Engineer III Qualification Include:

Bachelor of Science degree in Electrical Engineering (BSEE, BSCE, BSME) from an ABET accredited institution is required. Acceptable alternatives are: (1) a Professional Engineer's (PE) License (2) a Bachelor of Science degree in Engineering Technology from an ABET accredited institution (3) a Bachelor's degree in Electrical, Civil or Mechanical Engineering or technical field of study (non-ABET) plus an advanced degree in Electrical, Civil or Mechanical Engineering from a university with an ABET accredited Bachelor's program. Electrical Engineering is preferred.
A Fundamentals of Engineering (FE) Certificate is preferred.
Minimum of 3 (three) years of Engineering experience is required.

Engineer IV Qualifications include:

Bachelor of Science degree in Electrical Engineering (BSEE, BSCE, BSME) from an ABET accredited institution is required. Acceptable alternatives are: (1) a Professional Engineer's (PE) License (2) a Bachelor of Science degree in Engineering Technology from an ABET accredited institution (3) a Bachelor's degree in Electrical, Civil or Mechanical Engineering or technical field of study (non-ABET) plus an advanced degree in Electrical, Civil or Mechanical Engineering from a university with an ABET accredited Bachelor's program. Electrical Engineering is preferred.
A Fundamentals of Engineering (FE) Certificate is preferred.
Minimum of 5 (five) years of Engineering experience is required with a BS in Engineering or minimum of 7 (seven) years of Engineering experience is required with a BS in Engineering Technology.

All employees must have an account to use a FirstEnergy computer to apply for jobs. If you do not know if you have an account, please contact the IT Service Desk at , Option 1 - 1 for assistance.

Employers have access to artificial intelligence language tools (“AI”) that help generate and enhance job descriptions and AI may have been used to create this description. The position description has been reviewed for accuracy and Dice believes it to correctly reflect the job opportunity.

Dice Id: RTX1857ff
Position Id: 9ca26e649ab7eb81263da10077e33e58
Posted 19 hours ago

Fitment

Dice Job Match Score™

To see how well you match this job, please log in or create an account.

Once logged in, be sure to complete your profile to get the most accurate match score.

Create job alert

Never miss an opportunity! Create an alert based on the job you applied for.

Similar Jobs

Engineer, Power Network Applications

Akron, Ohio

•

Today

Job Description FirstEnergy at a Glance We are a forward-thinking electric utility powered by a diverse team of employees committed to making customers' lives brighter, the environment better and our communities stronger. FirstEnergy (NYSE: FE) is dedicated to integrity, safety, reliability and operational excellence. Headquartered in Akron, Ohio, FirstEnergy includes one of the nation's largest investor-owned electric systems, more than 24,000 miles of transmission lines that connect the Mid

Full-time

Protection & Controls Engineer

Virginia

•

Today

The Protection & Controls Engineer will support the design, configuration, testing, and commissioning of protection and control systems for utility transmission and substation projects. The successful candidate will work closely with engineering, construction, and commissioning teams to deliver safe, reliable, and compliant electrical infrastructure. Key ResponsibilitiesDevelop protection and control schemes for transmission and substation facilities.Perform relay settings calculations and coord

Full-time

Senior Transmission Line Engineer 1 - Grid

Remote

•

Today

Responsibilities This position will offer you the ability to apply and expand your knowledge of transmission line engineering including, conductors, hardware, insulation, structures, foundations and electrical principles to: Design transmission lines in the 69kV to 500kV range. Responsibility for cost analyses, development of design criteria, routing and siting of transmission lines. Responsibility for conductor selection studies, shielding, grounding and induction studies. Work with vendors a

Full-time

USD 84,762.00 - 129,498.00 per year

Transmission Line Engineer 2 - Grid

Pennsylvania

•

Today

Responsibilities This position will offer you the ability to directly apply your knowledge of transmission line engineering including, conductors, hardware, insulation, structures, foundations and electrical principles to: Design transmission lines in the 69kV to 765kV range. Perform structural analysis and design of pole, lattice, framed, and guyed structures.Perform foundation designs.Perform conductor selection studies, shielding, grounding and induction studies.Develop cost estimates and sc

Full-time

USD 69,298.00 - 99,644.00 per year

Job Details

Skills

Technical Support
Budget
Communication
Transformer
Modeling
RF
Collaboration
SCADA
Corrective And Preventive Action
RFC
Distribution
Regulatory Compliance
NERC
Management
Research
Presentations
Decision-making
Apache Storm
Science
Mechanical Engineering
Electrical Engineering
Service Desk

Summary

Job Description

Responsibilities include:

Providing technical support and guidance to develop transmission and sub-transmission infrastructure projects, plans and capital budgets to maintain the reliability and integrity of the FE transmission protection system.
Developing protective relay design specifications for transmission line and substation projects for use by Design Engineers in developing construction implementation packages. This includes specifying the types of protection schemes to be employed including specific details on relay models and communication architecture, instrument transformer selection, input and output contact assignments, etc.
Performing timely completion of modeling of the transmission system for short circuit calculation, relay modeling and coordination, breaker duty calculations and fault locating ensuring compliance with NERC, RF and FE protection criteria.
Developing relay settings for new and existing protection schemes. This involves performing relay setting coordination studies through the use of "time-current coordination" curves, "resistance-reactance" (R-X) diagrams, and step-distance diagrams, as well as the utilization of the short circuit, one-line, coordination graphics, relay checking and system simulator modules of the CAPE (Computer Assisted Protection Engineering) software program.
Participating in the peer review, electronic issuance, as-left verification and retention of all protection settings through the use of the company's setting management system - PowerBase
Performing timely analysis of automatic tripping of the transmission and sub-transmission systems. Gathering and analyzing SCADA alarm data, relay targets, digital fault recorder and relay event records and documents the findings in the ED Outage Analysis (EDOA) system. Following up on incorrect operations with work requests and corrective action plans to field personnel. Documenting findings and status of corrective action plans periodically to FE management and RFC.
Performing studies related to new load and generation interconnection facilities attaching to the assigned area
Performing transmission protection activities with the FE operating companies (distribution), other utilities, nonutility generation, the Regional Transmission Organization, and Reliability Councils
Following established procedures and retaining evidence to support compliance with the various NERC Protection and Control (PRC) Reliability Standards
Providing staff assistance to management and higher levels of professionals, as needed
Conducting technical research; Compiling and analyzing moderately complex data; Solving practical problems
Preparing technical reports and summaries; Making presentations when necessary
Demonstrating a solid commitment to all aspects of safety
Meeting customer needs by providing sound service and responsiveness.
Exercising sound decision making by developing alternatives and recommendations to technical work processes
Supporting FE storm restoration processes including performing assigned field storm roles during significant system disturbances

Bachelor of Science degree in Electrical Engineering (BSEE, BSCE, BSME) from an ABET accredited institution is required. Acceptable alternatives are: (1) a Professional Engineer's (PE) License (2) a Bachelor of Science degree in Engineering Technology from an ABET accredited institution (3) a Bachelor's degree in Electrical, Civil or Mechanical Engineering or technical field of study (non-ABET) plus an advanced degree in Electrical, Civil or Mechanical Engineering from a university with an ABET accredited Bachelor's program. Electrical Engineering is preferred.
A Fundamentals of Engineering (FE) Certificate is preferred.
Minimum of 2 (two) years of Engineering experience is required.

Engineer III Qualification Include:

Bachelor of Science degree in Electrical Engineering (BSEE, BSCE, BSME) from an ABET accredited institution is required. Acceptable alternatives are: (1) a Professional Engineer's (PE) License (2) a Bachelor of Science degree in Engineering Technology from an ABET accredited institution (3) a Bachelor's degree in Electrical, Civil or Mechanical Engineering or technical field of study (non-ABET) plus an advanced degree in Electrical, Civil or Mechanical Engineering from a university with an ABET accredited Bachelor's program. Electrical Engineering is preferred.
A Fundamentals of Engineering (FE) Certificate is preferred.
Minimum of 3 (three) years of Engineering experience is required.

Engineer IV Qualifications include:

Bachelor of Science degree in Electrical Engineering (BSEE, BSCE, BSME) from an ABET accredited institution is required. Acceptable alternatives are: (1) a Professional Engineer's (PE) License (2) a Bachelor of Science degree in Engineering Technology from an ABET accredited institution (3) a Bachelor's degree in Electrical, Civil or Mechanical Engineering or technical field of study (non-ABET) plus an advanced degree in Electrical, Civil or Mechanical Engineering from a university with an ABET accredited Bachelor's program. Electrical Engineering is preferred.
A Fundamentals of Engineering (FE) Certificate is preferred.
Minimum of 5 (five) years of Engineering experience is required with a BS in Engineering or minimum of 7 (seven) years of Engineering experience is required with a BS in Engineering Technology.

All employees must have an account to use a FirstEnergy computer to apply for jobs. If you do not know if you have an account, please contact the IT Service Desk at , Option 1 - 1 for assistance.

Dice Id: RTX1857ff
Position Id: 9ca26e649ab7eb81263da10077e33e58
Posted 19 hours ago

Fitment

Dice Job Match Score™

To see how well you match this job, please log in or create an account.

Once logged in, be sure to complete your profile to get the most accurate match score.

Create job alert

Never miss an opportunity! Create an alert based on the job you applied for.

Similar Jobs

Engineer, Power Network Applications

Akron, Ohio

•

Today

Full-time

Protection & Controls Engineer

Virginia

•

Today

Full-time

Senior Transmission Line Engineer 1 - Grid

Remote

•

Today

Full-time

USD 84,762.00 - 129,498.00 per year

Transmission Line Engineer 2 - Grid

Pennsylvania

•

Today

Full-time

USD 69,298.00 - 99,644.00 per year