SummaryYou will serve as a Supervisory General Engineer / Architect in the Resident Office in Charge of Construction (ROICC) Office Maine of NAVFAC ENGINEERING CMD MID-ATLANTIC.
Learn more about this agencyDutiesHelp
- You will function as a specialist in the fields of design and engineering, serving as the point of contract for coordination of all assigned projects.
- You will be responsible for the professional engineering and architectural expertise to produce construction contract documents through in-house capability, Architectural and Engineering contractor, or other contracting vehicles.
- You will be in "Responsible Charge" for all architectural and engineering work performed by subordinate architects, engineers, interior designers, project managers, planners, etc.
- You will lead design staff in performing project management roles for the project (scope, cost, and schedule) from preliminary design authorization to project closeout.
- You will ensure that projects are tracked using appropriate NAVFAC software tools, such as the ieFACMAN suite (eProjects), and that all project records are kept current.
RequirementsHelp
Conditions of employment- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to obtain and maintain a current valid United States driver's license.
- You will be required to possess and maintain a current Professional Engineer or Registered Architect license.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Functional Area and Tier assigned to the position, along with Continuous Learning (CL) points, are required within established timeframes.
- You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics. You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.
QualificationsThis position has a selective placement factor that will be used to screen out ineligible candidates. The selective placement factor is:
Current Registration as a Professional Engineer or Registered Architect in a State, the District of Columbia, the Commonwealth of Puerto Rico, or a territory of the United States. NOTE: You must submit a copy of your current license or registration with your application package. A copy of a wall certificate that does not have an expiration date will not serve to verify this requirement.
Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-13 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Providing project and design management leadership, training, and mentoring in the area of Project and Design Management; 2) Planning and leading meetings and conferences required for execution of projects; 3) Collaborating with other engineering and architectural disciplines to review and advise on the development of execution plans and timely completion of all phases of the work within available funds and authorized scope; 4) Providing consultative services on project management issues and the entire range of architectural and engineering activities for facilities construction; AND 5) Providing guidance of facilities acquisition, as well as project funding authority levels and sources, contract requirements, contract documents, proposal and bidding procedures.
Additional qualification information can be found from the following Office of Personnel Management website:
AND ;br>
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
EducationApplicants for the Professional Engineering Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: ;br>
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: ;br>
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
Applicants for the Professional Architecture Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:Successful completion of a bachelor's or higher degree in architecture.
OR
Successful completion of a bachelor's or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
OR
Have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The curriculum for a degree is in either architecture or architectural engineering and covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities OR you lack a degree in architecture, but have 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture that demonstrates that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. (Note - In the absence of college courses, 5 years of such experience is required).
Additional informationThis position is covered by the Department of Defense Priority Placement Program.
Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations.
Temporary actions taken under this announcement may be made permanent without further competition.
This is an obligated position. The former incumbent has return rights to this position under PL 86-585.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: ;br>
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: ;br>
Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
Expand Hide additional information
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
BenefitsHelp
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Never miss an opportunity! Create an alert based on the job you applied for.
