Lead Engineer - Electrified Powertrain Controls Jobs in Houston, TX

Refine Results
1 - 20 of 54 Jobs

Lead Controls Engineer

Collinwood Technology Partners

•

Remote

Full-time

The Controls Engineer is responsible for leading all phases of a controls project to include concept and research, estimating support, component selection, network design, panel design, layout, device troubleshooting, PLC and HMI programming; on-site installation and debug; and after-sales support while working independently. A successful Controls Engineer has an expert level of knowledge and understanding of the full scope of controls engineering practices, theories, and PLC programming to impl
Easy Apply
Posted 60+ days ago | Updated 6 days ago

Lead Instrumentation & Controls Engineer 1 - Nuclear

Sargent & Lundy LLC.

•

Remote

Full-time

Description This I&C position offers the opportunity to work on upgrading and modernizing nuclear power plants with the latest control technologies the industry offers. You will be expected to both lead and support small and large controls projects with a focus on technical execution and effective Project Management. These projects will require coordination with mechanical, electrical, and structural disciplines to bring the project to completion. You work will include investigating, troublesho
Posted 1 day ago | Updated 9 hours ago

Lead Substation Engineer Protection & Controls

Blue Signal

•

Remote

Full-time

Lead Substation Engineer Protection & Controls Are you an experienced electrical engineer passionate about the future of grid protection and control systems? Join a nationally respected infrastructure engineering consultancy that is redefining the standards in power delivery design and modernization. This is a rare opportunity to step into a fully remote, high-ownership role where your technical leadership directly supports the resiliency of energy systems across the country. This organization
Easy Apply
Posted 13 days ago

Lead I&C (Instrumentation & Controls) Embedded Software Engineer (Remote Eligible, U.S.)

GE Vernova

•

Remote or Wilmington, North Carolina, USA

Full-time

Job Description Summary The I&C (Instrumentation & Controls) Embedded Software Engineer works within the I&C Engineering team of the GE Hitachi (GEH) Engineering organization. The I&C team is responsible for designing and implementing I&C electronic hardware and software for I&C systems for Nuclear Power Plants. The I&C software team has strong interfaces with electronic hardware design and plant system operations. This role requires technical problem solving, strong software skills and effectiv
Posted 60+ days ago | Updated 10 hours ago

Controls Engineer III

Optime Tech

•

Remote

Contract

Controls Engineer Columbus, IN (Remote but must be open to travel to Industrial plants nation wide - expenses will be paid by our client) 12+ Months ** This role is remote our client is looking for candidates who can travel nation wide to other industrial plants of our client ** We are looking for candidates with strong experience in IIoT Key Skills : 6 Level Automation Stack PLC HMI SCADA Cloud ERP Description:Hours: Regular schedule, 8 hrs/day, 5 days/week Top 3 to 5 Must Have skills and exp
Easy Apply
Posted 60+ days ago | Updated 29 days ago

Controls Software Engineer - Onsite

VIVA USA INC

•

Houston, Texas, USA

Contract

Title: Controls Software Engineer - Onsite Mandatory skills: Wonderware Intouch, Rockwell Control Logix, Design Studio, industrial control systems, Gas Turbines, HMI, Human Machine Interface, HMI Design, Software design, HMI systems, HMI specification document, HMI Screens document, engineering environment, software documentation, turbo compressor, Logic Flow Diagrams, alarm, trip matrix, controls system design, Microsoft office, Word, Excel, Outlook, InTouch, FTView, Rockwell, Logix, Wonderwar
Easy Apply
Posted 34 days ago | Updated 1 day ago

Staff Instrument & Controls Engineer - Power (Houston)

Burns & McDonnell

•

Houston, Texas, USA

Full-time

Description The Power global practice at Burns & McDonnell is seeking to hire an Instrument & Controls Engineer for our Houston, TX regional office! The Power Division focuses on the design and construction of power generation facilities, including fossil, hydrogen, solar, nuclear, and energy storage. Projects also include other types of heavy industrial facilities, such as decarbonization, mining, and gas compression. The project diversity offers a wide range of design and project execution exp
Posted 60+ days ago | Updated 9 hours ago

Security and Privacy Controls Specialist

Cloud and Things

•

Remote or Albany, New York, USA

Full-time, Third Party, Contract

Our goal is to solve problems and deliver results for our clients. At Cloud and Things, you can be a part of transforming the public sector's IT environment. Our team is on the forefront of helping to solve the government's most complex IT challenges. If you are seeking a role that offers the opportunity to work on rewarding projects, consider a career with Cloud and Things. Overview: We are seeking a Security and Privacy Control Specialist who will support our client. The ideal candidate will
Easy Apply
Posted 60+ days ago | Updated 8 hours ago

Full-Stack Software Engineer (L4) - Workforce Security Controls Automation Team (WCAT)

Netflix, Inc.

•

Remote

Full-time

Netflix is one of the world's leading entertainment services, with 283 million paid memberships in over 190 countries enjoying TV series, films and games across a wide variety of genres and languages. Members can play, pause and resume watching as much as they want, anytime, anywhere, and can change their plans at any time. About the Team The Workforce Controls Automation Team (WCAT) builds the software products and services that help us scale security controls in our workforce security domain
Posted 59 days ago | Updated 10 hours ago

Cyber Security Controls Assessor

Kforce Technology Staffing

•

Remote or Oakland, California, USA

Contract

RESPONSIBILITIES: Kforce has a client that is seeking a Cyber Security Controls Assessor in Oakland, CA. Team Overview: The Cyber Security Controls Assessment family is responsible for the assessment, verification, review, and audit of General Computer Controls across the enterprise. The Cyber Security Controls Assessor (-Assessor-) will be responsible for assessments which will require review and evaluation of IT and/or business systems and processes for compliance with defined regulatory stan
Posted 7 days ago | Updated 3 hours ago

Senior Controls Assessment & Testing Analyst - Technology and Cybersecurity Risk

M&T BANK CORPORATION

•

Remote

Full-time

The Bank sponsors individuals for TN and H-1B transfers on a case by case basis. Please note that this position is not open to anyone on a H-1B or F-1 student visa including those eligible for CPT/OPT or the Stem OPT extension. Remote is offered for this position, but any applicants located (or willing to relocate) to Buffalo, NY, Wilmington, DE or Bridgeport, CT and willing to work Hybrid three days in office and two days remote are preferred. Overview: Uses professional knowledge, skills, an
Posted 60+ days ago | Updated 9 hours ago

Controls Assessment & Testing Senior Specialist - Technology and Cybersecurity Risk

M&T BANK CORPORATION

•

Remote or Buffalo, New York, USA

Full-time

The Bank sponsors individuals for TN and H-1B transfers on a case by case basis. Please note that this position is not open to anyone on a H-1B or F-1 student visa including those eligible for CPT/OPT or the Stem OPT extension. Overview: Leads risk analysis for complex initiatives, influencing overarching risk framework and providing advanced guidance to leadership for informed decision-making aligned with organizational imperatives. Primary Responsibilities: Develop and implement strategic ap
Posted 60+ days ago | Updated 10 hours ago

Senior Application Engineer - Protection, Controls and Automation

Schneider Electric

•

Houston, Texas, USA

Full-time

Sr. Application Engineer - Protection, Controls and Automation This candidate must be based within 40 miles of a Schneider Electric Hub location (Andover, MA; Boston, MA; Chicago, IL; Dallas, TX; Foxboro, MA; Nashville, TN; Raleigh, NC; Florham Park, NJ; Houston/Round Up, TX; Louisville, HY; St. Louis, MO).This role is intended to be in the office 2-3 days per week with up to 25% travel per month to various customer locations across the US. "The Protection, Controls & Automation (PCA) group of
Posted 3 days ago | Updated 10 hours ago

Protection and Controls Engineer (P.E.)

AECOM Corp. - Worldwide

•

Houston, Texas, USA

Full-time

Company Description Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world's most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating in
Posted 50 days ago | Updated 29 days ago

Protection and Controls Engineer

AECOM Corp. - Worldwide

•

Houston, Texas, USA

Full-time

Company Description Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world's most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating in
Posted 38 days ago | Updated 29 days ago

Senior Electrical Protection & Controls Engineer

Archer Daniels Midland

•

Houston, Texas, USA

Full-time

Job Description Senior Electrical Protection & Controls Engineer Ideal work locations for this position include Decatur, IL; Cedar Rapids, IA; Des Moines, IA; Clinton, IA; Lincoln, NE, or a regional ADM location. This is not a remote work opportunity, and the individual must report into an ADM site. This is a permanent, full-time, exempt-level position. Position Description: ADM is seeking a Senior Protection and Controls Engineer to support the development of protective relay design associat
Posted 60+ days ago | Updated 10 hours ago

Controls Engineer

Carrier Corporation

•

Remote or Texas, USA

Full-time

Country: United States of America Location: CATXO: Carrier-Home Texas Remote Location, Remote City, TX, 75001 USA Carrier Global Corporation, global leader in intelligent climate and energy solutions, is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the cen
Posted 1 day ago | Updated 10 hours ago

Project Controls /Business Analyst

Advansys Inc

•

Houston, Texas, USA

Contract

Project Controls /Business Analyst Position Description This position is located in our Houston, Texas office with work performed at client site in Houston, Texas; however, a hybrid working model is acceptable. Key Responsibilities: Time Writing Management: Oversee the accurate entry and tracking of time writing in SAP, ensuring compliance with project requirements. Cost Reporting: Generate and analyze cost reports related to time writing entries, providing insights to project managers and stak
Easy Apply
Posted 12 days ago

Staff Instrument & Controls Engineer - Oil, Gas & Chemical (Houston)

Burns & McDonnell

•

Houston, Texas, USA

Full-time

Description Burns & McDonnell is seeking a Staff Instrument & Controls Engineer in our Houston, TX office within our Oil, Gas & Chemical Global Practice, working on minor and major scale EPC projects and serving mid-stream, refining, chemical, and renewable industries. The Staff Instrument & Controls (I&C) Engineer will work on design teams to create world-class designs for grassroots and revamp/brownfield refining and chemical projects. As a Staff I&C Engineer, you will work with the design tea
Posted 5 days ago | Updated 9 hours ago

Senior Instrument & Controls Engineer

BP

•

Remote or Houston, Texas, USA

Full-time

Entity: Production & Operations Job Family Group: Engineering Group Job Description: The Instrument and Control Engineer position will ensure pragmatic solutions are implemented for management of risk, production efficiency, plant reliability, defect elimination and engineering standardization, related to instrumented protective systems, process control systems and telecommunications systems, in support of safe, reliable, and compliant operations. Key Accountabilities: Provide technical ass
Posted 13 days ago | Updated 10 hours ago