Job Title: Manufacturing Engineer
Duration: Contract
Location: Remote
Travel
- Occasional plant travel (limited)
- Potential visits to:
- ELP (East Liberty Plant)
- MAP (Marysville Auto Plant)
- Possible travel to Alabama
OFFICAL JD
Responsibilities include:
Supports advance Body Frame Stamping product feasibility from styling sketch through 1st drawing issue for New Model Body in White construction. Creates part data change proposals, tool process plan, and rough layout using Catia and Autoform Simulation. Reports technical criteria to Category Technical Expert and New Model Project Leadership. 30%
• Supports the development of new model stamping tooling specifications and process plan from 1st drawing to Die GO. Performs feasibility checks and simulations using Autoform and Catia on product and styling data to ensure parts are formable and manufacturable. 50%
• Completes checks for manufacturing stamping new model equipment verification check list and drawing maturation requirements. 10%
• Supports complex manufacturing category problem analysis, determine root causes, recommend corrective action. 10%
MY NOTES BELOW.
Role Overview – Stamping & Plastics (Development)
This role focuses on stamping development and feasibility for exterior body components (Class A surfaces). The work involves early-stage collaboration with design teams, surfacing, and simulation to ensure manufacturability and cost-effectiveness.
Key Responsibilities
- Work from early design sketches in collaboration with engineering/design teams
- Perform surfacing and modeling in CATIA (V5/V6)
- Run AutoForm simulations to assess part feasibility and formability
- Evaluate:
- Manufacturability of parts
- Cost effectiveness of designs
- Support development of Class A exterior body panels (with occasional door/floor components)
- Handle multiple projects simultaneously in a high-volume workload environment
- Present and summarize feasibility findings to stakeholders
- Gain exposure to the die structure / manufacturing tooling side
Required Experience
- Class A stamping part feasibility experience
- Strong experience with CATIA V5 or V6 (surfacing/modeling required—not just basic use)
- Experience running AutoForm simulations and interpreting results
- Understanding of formability and stamping processes
- General manufacturing background (stamping, die design, or tooling)
- Typically 3+ years of relevant experience
Never miss an opportunity! Create an alert based on the job you applied for.
