canalyzer Jobs in michigan

Refine Results
1 - 20 of 22 Jobs

Senior Verification Engineer- Charging

General Motors

•

Milford, Michigan, USA

Full-time

Job Description Additional Job Description Relocation: This job is not eligible for relocation benefits. Any relocation costs would be the responsibility of the selected candidate. Work Arrangement: Hybrid: This full-time position does not require an employee to be on-site full-time to perform most effectively. However, this position requires an employee to be onsite at least three times per week (Tue., Wed., Thurs.) You will be based out of Milford Proving Grounds The Role: We are seeking a
Posted 3 hours ago

Electric Drive Software Engineer

General Motors

•

Pontiac, Michigan, USA

Full-time

Job Description Design, develop, implement, and test embedded software to control the electric machines and power inverter modules in hybrid and electric vehicles. Design, Develop, Implement, and Test software for digital control of high voltage power electronics and electric machines, including both permanent magnet and induction motors. Design and execute unit and functional tests to ensure compliance with design requirements. Provide independent review of software written by others. Support h
Posted 16 days ago | Updated 3 hours ago

HIL Simulation and Integration Engineer

General Motors

•

Milford, Michigan, USA

Full-time

Job Description DUTIES: Create hardware in the loop environments to enable development, verification and validation of embedded controllers and calibrations for battery, electrification, engine, and powertrain. Work closely with software development, calibration, and validation stakeholders to identify solutions to customer needs. Create and maintain simulation models (such as Plant, sensors and actuators, serial data communication and controller models) for creating test environments. Understa
Posted 10 days ago | Updated 3 hours ago

Mule and Prototype IPC Engineer

Aziro Technologies LLC

•

Auburn Hills, Michigan, USA

Contract

The Mule and Prototype IPC Engineer is responsible to lead the design of CAN communication and development of functional requirements specific to mule and prototype vehicles while working with suppliers and Engineering Support teams including systems, design release, wiring, networking and architecture engineers, Program Management, and Manufacturing teams as required to design and build mule and prototype vehicles. Responsibilities include: Design and modify vehicle mule and prototype network t
Easy Apply
Posted 29 days ago | Updated 25 days ago

Functional Integrator

Aziro Technologies LLC

•

Auburn Hills, Michigan, USA

Full-time

Job Title: Functional Integrator Location: Auburn Hills, Michigan What you ll be doing: The Functional Integrator is responsible for leading the design and development of an automotive ECU in the following areas: Electrical Hardware, software, functional safety, ECU diagnostics and software/ electrical hardware degradation strategy to ensure successful vehicle launch. Responsibilities include: Designing of ADAS/Chassis features through hands on in-vehicle and laboratory developmentWork with sele
Easy Apply
Posted 29 days ago | Updated 25 days ago

Mule and Prototype IPC Engineer

Aziro Technologies LLC

•

Auburn Hills, Michigan, USA

Contract

Job Title: Mule and Prototype IPC Engineer Duration: 6+ Months Location: Auburn Hills, MI (Onsite - has the possibility of Hybrid and that's fully depends on the onsite reporting Manager) What you ll be doing:The Mule and Prototype IPC Engineer is responsible to lead the design of CAN communication and development of functional requirements specific to mule and prototype vehicles while working with suppliers and Engineering Support teams including systems, design release, wiring, networking and
Easy Apply
Posted 31 days ago | Updated 25 days ago

Functional Integrator

Aziro Technologies LLC

•

Auburn Hills, Michigan, USA

Contract

What youll be doing: The Functional Integrator is responsible for leading the design and development of an automotive ECU in the following areas: Electrical Hardware, software, functional safety, ECU diagnostics and software/ electrical hardware degradation strategy to ensure successful vehicle launch. Responsibilities include: Designing of ADAS/Chassis features through hands on in-vehicle and laboratory development Work with selected suppliers to make sure system meets all customer functiona
Easy Apply
Posted 31 days ago | Updated 25 days ago

Prototype Systems Integration Engineer ( Vehicle Network Engineer )

Aziro Technologies LLC

•

Auburn Hills, Michigan, USA

Full-time

Job Title: Mule and Prototype IPC Engineer Location: Auburn Hills, Michigan What you ll be doing: The Mule and Prototype IPC Engineer is responsible to lead the design of CAN communication and development of functional requirements specific to mule and prototype vehicles while working with suppliers and Engineering Support teams including systems, design release, wiring, networking and architecture engineers, Program Management, and Manufacturing teams as required to design and build mule and pr
Easy Apply
Posted 29 days ago | Updated 25 days ago

Software Engineer (MULTIPLE POSITIONS) (REF261567R)

Bosch

•

Plymouth, Michigan, USA

Full-time

Company Description Robert Bosch LLC seeks Software Engineer (MULTIPLE POSITIONS) at its facility located at 15000 N Haggerty Road, Plymouth, Michigan 48170. Develop software for brake modulation systems, configure and develop ESP/ IBooster software components including CAN communication and diagnostics using C/C++. Responsible for analysis and development of the requirements for core brake modulation controllers based on customer specifications. Discuss the interface specifications for affecte
Posted 40 days ago | Updated 7 hours ago

Sr Software Engineer (Multiple Positions) (REF260911H)

Bosch

•

Plymouth, Michigan, USA

Full-time

Company Description Robert Bosch LLC seeks Sr Software Engineer (Multiple Positions) at its facility located at 15000 Haggerty Rd, Plymouth, MI 48170. Develop Software for Brake modulation systems, configuring and developing ESP/ iBooster software components including CAN communication and diagnostics using C/C++. Analyze and develop the requirements for core brake modulation controllers based on customer specifications. Discuss the interface specifications for affected components with the comp
Posted 47 days ago | Updated 7 hours ago

Sr. Software Engineer (Multiple Positions) (REF262070O)

Bosch

•

Plymouth, Michigan, USA

Full-time

Company Description Robert Bosch LLC seeks Sr. Software Engineer (Multiple Positions) at its facility located at 15000 N Haggerty Rd, Plymouth, MI 48170. Negotiate system and software requirements with the customer. Analyze internal and external requirements. Select the right brake product that fits customer needs. Translate customer requirements into high level design, which include maintaining the system and part of the software architecture for the customer project. Create system level tests
Posted 33 days ago | Updated 7 hours ago

Verification Engineer- Charging

General Motors

•

Milford, Michigan, USA

Full-time

Job Description Relocation: This job is not eligible for relocation benefits. Any relocation costs would be the responsibility of the selected candidate. Work Arrangement: Hybrid: This full-time position does not require an employee to be on-site full-time to perform most effectively. However, this position requires an employee to be onsite at least three times per week (Tue., Wed., Thurs.) You will be based out of Milford Proving Ground. The Role: We are seeking a Verification Engineer - Ch
Posted 3 hours ago

System Design Engineer

General Motors

•

Milford, Michigan, USA

Full-time

Job Description DUTIES: Defines and designs the system design and technical specifications for automated driving technologies and ADAS. Generates technical solutions including specifying of requirements, functional decomposition, analysis, development, and testing for current, new and major programs. Designs systems interfaces and requirements, including detailed design development and validation using Protobufs and Feature Files. Develops software system team design content and software anomal
Posted 14 days ago | Updated 3 hours ago

Application Engineer - vECU Development

General Motors

•

Milford, Michigan, USA

Full-time

Job Description Work Arrangement: Hybrid: This role is categorized as hybrid. This means the successful candidate is expected to report to Milford, MI three times (Tues., Wed., Thurs.) a week, at minimum The Application Engineer - vECU Development will Develop, test, validate, integrate, and release Virtual Mechatronics Control Unit (vMCU) for Software Defined Vehicle (SDV) architecture for future GM passenger vehicles (conventional ICE, Hybrid Electric Vehicles (HEVs), and Battery Electric
Posted 56 days ago | Updated 3 hours ago

Senior Software Engineer

General Motors

•

Milford, Michigan, USA

Full-time

Job Description Defines, designs, and develops control systems, diagnostics, and controller communications in the Propulsion Thermal ART in Vehicle Mechatronic Embedded Controls (VMEC) organization. Develops software and controls to manage integrated thermal loops to optimize energy use and thermal storage capacity. Participates in the development of controls and diagnostics within an agile environment using appropriate common methods for VMEC features. Perform as Subject Matter Expert (SME) fo
Posted 37 days ago | Updated 3 hours ago

Software Engineer (Multiple Positions) (REF262068E)

Bosch

•

Plymouth, Michigan, USA

Full-time

Company Description Robert Bosch LLC seeks Software Engineer (Multiple Positions) at its facility located at 15000 Haggerty Road, Plymouth, MI 48170. Analyze customer requirements and create related subsystem and module requirements. Create design documentation in both text and model-based formats. Implement logic for new features and/or modify existing logic to realize the design. Perform reviews for requirements, designs and implementations, as well as support other team members. Follow the d
Posted 33 days ago | Updated 7 hours ago

Controller Integration Engineer

General Motors

•

Warren, Michigan, USA

Full-time

Job Description Generate technical solutions including specifying of requirements, functional decomposition, analysis, development and testing for current, new and major programs. Perform as Subject Matter Expert (SME) for at least one platform or application component and participates in interviews. Verify controller functionality on a bench and vehicle. Work with Technical Review Boards and other cross functional teams to define test cases and to determine how frequently they should be execute
Posted 16 days ago | Updated 3 hours ago

Sr. Test Engineer, Powertrain

Rivian

•

Plymouth, Michigan, USA

Full-time

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it
Posted 60+ days ago | Updated 7 hours ago

Motorsport Hybrid Powertrain Application Engineer

Bosch

•

Remote or Farmington Hills, Michigan, USA

Full-time

Company Description We Are Bosch. At Bosch, we shape the future by inventing high-quality technologies and services that spark enthusiasm and enrich people's lives. Our areas of activity are every bit as diverse as our outstanding Bosch teams around the world. Their creativity is the key to innovation through connected living, mobility, or industry. Let's grow together, enjoy more, and inspire each other. Work #LikeABosch Reinvent yourself: At Bosch, you will evolve. Discover new directions:
Posted 60+ days ago | Updated 7 hours ago

Prototype IPC Engineer

Aziro Technologies LLC

•

Auburn Hills, Michigan, USA

Contract

The Mule and Prototype IPC Engineer is responsible to lead the design of CAN communication and development of functional requirements specific to mule and prototype vehicles while working with suppliers and Engineering Support teams including systems, design release, wiring, networking and architecture engineers, Program Management, and Manufacturing teams as required to design and build mule and prototype vehicles. Responsibilities include: Design and modify vehicle mule and prototype network t
Easy Apply
Posted 31 days ago | Updated 25 days ago