Closing Date to Apply: Open Until Filled
Salary:Engineer I: $80,366 - $129,813
Midpoint: $105,090
Engineer II: $85,623 - $139,896
Midpoint: $112,760
Engineer III: $104,822 - $177,107
Midpoint: $140,964
Engineer IV: $112,585 - $192,317
Midpoint: $152,452
Engineer V: $130,666 - $228,062
Midpoint: $$179,364
Grant PUD posts the full salary range for each position. The midpoint is provided as a reference point and is not a guaranteed starting pay. Starting pay is based on job-related factors such as qualifications, experience, skills, internal alignment, and organizational needs. Most new hires are typically placed between the minimum and midpoint of the range.
Benefits: This link below will provide you with Grant PUD's benefit that may be available if hired, different employee types are eligible for different benefits.
Grant PUD - Unified Insurance Program (uip-wa.org)
Grant County PUD will administer a background check as part of the hiring process, if selected for this position.
Applicants meeting minimum qualifications may be further evaluated based on preferred qualifications and job-related criteria. Only the most qualified candidates will be referred for further consideration.
The District may use the applicant pool and results from this recruitment to fill additional vacancies in the same classification for up to six (6) months following the recruitment closing date, consistent with District policy and applicable law.
Position SummaryBe part of a Maintenance Engineering team responsible for Electrical best practice in supporting the operations and maintenance department within Grant County PUD's Priest Rapids and Wanapum Hydro Power Generation Facilities. This position provides knowledge and expertise related to Wanapum and Priest Rapids Hydro Dams, WAN 230kV Switchyard, Priest Rapids Hatchery System, and other supporting facilities within Grant County PUD's Power Production Department.
Essential FunctionsEssential functions, as defined under the Americans with Disabilities Act, may include the representative duties, knowledge, and skills below. This is not a comprehensive listing of all functions and duties performed by incumbents of this class; employees may be assigned duties not listed below. Reasonable accommodations will be made as required. The job description does not constitute an employment agreement and is subject to change at any time by the employer.
Core Responsibilities - All Levels- Individual contributor (non-leadership) position in the Maintenance Engineering Group responsible for providing daily engineering support for Operations and Maintenance within the designated area.
- Support troubleshooting during equipment outages or routine maintenance.
- Work with equipment including, but not limited to, High/Medium/Low Voltage Distribution systems, PLC/VFD and Control Systems, Exciters, Governors, Generator Systems, Transformers (Distribution and GSU), Ovation SCADA Systems, Protective Relay Equipment, High/Medium/Low Voltage Circuit Breakers, Battery Systems, Bridge Cranes, Motor Control Centers, and supporting equipment required for safe and reliable operation of generators and ancillary equipment.
- Support the Asset Management process for new and modified equipment, including entry/removal of assets, Critical Spare Process, BOMs, Test Reports, and related documentation.
- Support high-level standards associated with Preventative Maintenance (PM)/Job Plans and Maintenance Adherence. Physical updates to PMs/Job Plans are completed by the Planning Department.
- Assist Engineering in providing turnover materials for Maintenance Manuals, Troubleshooting Guides, and SOPs for newly installed, modified, and existing equipment. Physical updates to Manuals, Guides, and SOPs are completed by the Planning Department.
- Support the Planning Department with obsolete-part replacement and research. Like-for-like replacement purchases should be handled by the Planning Department.
- Identify required maintenance related to NFPA 70B, NEC, PRC-005, and other regulatory compliance requirements.
- Review outage work and appropriate schedules against required PMs.
- Analyze test reports for electrical equipment throughout the designated area, consistent with assigned level of responsibility.
- Demonstrate commitment to Grant PUD's mission, vision, values, and strategic plan. Understand and adhere to applicable laws, regulations, security guidelines, Grant PUD policies, and procedures.
- Actively participate in all aspects of the safety program, including:
- Following all safety policies and procedures.
- Alerting supervisors and coworkers to unsafe or hazardous working conditions.
- Reporting safety incidents or close calls within 24 hours to a supervisor.
- Accepting feedback from supervisors and coworkers regarding personal safety performance.
Level-Specific Scope and ResponsibilityEngineer I-II- Provide engineering support for low-impact equipment at Engineer I and low/medium-impact equipment at Engineer II.
- Maintain a basic understanding of applicable electrical, generation, distribution, control, and supporting equipment, with increased familiarity expected at Engineer II.
- Support the Engineering Lead on Asset Management and PM/Job Plan standards.
- Work with Engineering SMEs on regulatory maintenance, outage review, and test-report analysis.
- Rely strictly on Electrical Subject Matter Experts for path-forward decisions.
Engineer III- Supports medium/high-impact equipment and is knowledgeable in applicable equipment and systems.
- Assists with Asset Management and supports PM/Job Plan standards.
- Works with Planning on regulatory maintenance and outage review.
- Provides technical knowledge to Engineers, Electricians, Operators, and other Power Production departments for troubleshooting, outages, breakdowns, and detailed design.
- Performs some analysis of test reports for high/medium-impact equipment.
- Relies mostly on Electrical SMEs for path-forward decisions.
- Has knowledge of Technical Maintenance Standards and implementation.
- Performs work on systems with a medium level of regulatory-compliance risk and is familiar with FERC, NERC, and CIP impacts.
Engineer IV- Supports high/critical-impact equipment and is an expert in applicable equipment and systems.
- Develops Asset Management processes and high-level PM/Job Plan standards.
- Works with Planning on regulatory maintenance and outage review.
- Provides technical knowledge across Power Production.
- Performs routine analysis of test reports for high/medium-risk equipment.
- Typically relies on feedback from other Electrical SMEs for Critical/High-impact path-forward decisions.
- Serves as expert and owner of Technical Maintenance Standards and implementation.
- Applies industry practices, Utility Standards, Codes, and legal standards.
- Performs work on systems with a high level of regulatory-compliance risk and is extremely familiar with FERC, NERC, and CIP impacts.
Engineer V- Supports high/critical-impact equipment as a high-performing individual contributor and Subject Matter Expert.
- Leads development of Asset Management processes and high-level PM/Job Plan standards.
- Works with Planning on regulatory maintenance and outage review.
- Provides technical knowledge across Power Production.
- Provides project-management support including budget forecasts, scheduling, coordination, construction, and commissioning for medium/large projects.
- Performs complex analysis of test reports for critical/high-risk equipment.
- Relies on some feedback from other Electrical SMEs for Critical/High-impact path-forward decisions.
- Serves as Subject Matter Expert and owner of Technical Maintenance Standards and implementation.
- Expertly applies industry practices, Utility Standards, Codes, and legal standards.
- Performs work on systems with the highest level of regulatory-compliance risk and is extremely familiar with FERC, NERC, and CIP impacts.
Knowledge, Skills, and Abilities by LevelA fully skilled candidate should demonstrate proficiency appropriate to the assigned Engineer classification. Unless otherwise noted, expected proficiency generally progresses as follows:
- Engineer I: Build knowledge/basic understanding.
- Engineer II: Basic understanding/familiarity.
- Engineer III: Knowledge/some experience.
- Engineer IV: Advanced knowledge/experience.
- Engineer V: Expert/high level of experience.
Technical Knowledge and SkillsThe progression above applies to:
- Generators, Exciters, Governors, and supporting equipment, including equipment in Hydro Dam, Natural Gas/Coal, and/or Nuclear Power facilities.
- Maintenance best practices on industrial equipment and the Asset Strategy process, including PMs, BOMs, Spare Parts, Asset Entry, and Maintenance Manuals. Engineer IV-V are expected to be experts in these areas.
- High/Medium Voltage Transmission and Distribution Equipment.
- Switchgear, MCCs, Station Service, and Substation Equipment related to industrial and powerhouse distribution systems. Engineer IV-V require advanced knowledge of Station Service and Substation Equipment.
- Industrial Control Systems, including Programmable Logic Controllers (PLCs), Variable Frequency Drives (VFDs), Motor Control Circuits, instrumentation devices such as Flow, Level, Pressure, and Temperature Sensors, and PID Loop Controls. Engineer V is expected to be an expert.
- Computer programming in control languages such as Ladder Logix, C++, Structure Text, Block Logix, and Visual Basic. Engineer I-II require basic understanding/skills, Engineer III some programming experience, and Engineer IV-V advanced programming.
- Troubleshooting, maintenance, and optimization techniques related to operating systems, electrical equipment, generation, and High/Medium/Low Voltage Distribution systems. Engineer IV-V require advanced capability.
Additional Higher-Level Knowledge- Engineer III: Some experience with data communication protocols and networking equipment related to Protective Relays (SEL), PLC, HMI, VFD, and Ethernet/Fiber switch communication systems; knowledge of FERC/NERC Standards.
- Engineer IV-V: Experience with those data communication protocols and networking systems; advanced knowledge of FERC/NERC Standards.
- All Levels: Technical writing and ability to draft reports associated with equipment performance and impacts to Operations and Maintenance; Engineer III-V reports may involve critical equipment.
- All Levels: Generate, interpret, review, and revise existing/new drawings.
- Engineer III-V: Modify/prepare technical specifications used by the Electrical Department referencing best industrial practices, IEEE standards, NEC, and other manufacturing techniques.
Required Qualifications (Education, Experience, Licenses & Certifications):
Applies to All Levels- Bachelor's degree in Electrical Engineering or Engineering Technology field.
- Valid State driver's license with no restrictions.
Level-Specific Required Experience- Engineer I: No additional experience requirement listed.
- Engineer II: 1 year in the discipline of Electrical Engineering or Engineering Technology.
- Engineer III: 3-5 years in the discipline working in a Utility or Industrial Environment.
- Engineer IV: 6 years in the discipline working in a Utility or Industrial Environment.
- Engineer V: 10 years in the discipline working in a Utility or Industrial Environment.
Preferred Qualifications (Education, Experience, Licenses & Certifications):
- Engineer I-II: Washington State Engineering in Training Certification.
- Engineer III: Washington State Engineering in Training Certification; Professional Engineer (PE).
- Engineer IV-V: Master's degree; Washington State Engineering in Training Certification; Professional Engineer (PE).
Other Knowledge, Skills & Abilities- Knowledge of NERC standards and regulatory compliance.
- Knowledge of concepts, principles, theories, and methods surrounding electrical engineering industry standards and best practices, including NEC, IEEE, and NFPA.
- Ability to perform work in the field and in industrial environments.
- Problem-solving and critical-thinking skills.
- Written and oral interpersonal communication; workflow and time management.
- Ability to utilize MS Office products and specialized software, tools, and applications.
Physical Requirements- Position may be eligible for partial hybrid work arrangement: Yes No
- Majority of work is performed in a standard office
- Some field work that may require operation of a
- Typical shifts of employees in this position: 8 hours 9 hours 10 hours 12 hours
*For a full list of requirements, the applicant/incumbent should refer to the Physical Capacity Evaluation (PCE).
The statements contained herein reflect general details as necessary to describe the principal functions for this job, the level of knowledge and skill typically required, and the scope of responsibility, but should not be considered an all-inclusive listing of work requirements. Individuals may perform other duties as assigned, including work in other functional areas
Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
Never miss an opportunity! Create an alert based on the job you applied for.