Electrical Engineer

Summary

About the Position: This position is with U.S. Army Corps of Engineers, SWD, Ft Worth District with a duty station location of Ft. Worth, TX.

This announcement is NOT intended for current, permanent Army employees. Current, permanent Army employees to be considered for this time-limited assignment apply to Announcement # CEDD-26-12908567-MP.

Please see "Additional Information" section below for further details.

Duties

Help

• Serves as the electrical engineering technical specialist in the Electrical Section of the Fort Worth District (SWF) focusing on specific electrical engineering features such as exterior overhead and underground electrical power distribution.
• Serves as the electrical design expert in the full range of electrical systems for Military Construction (MILCON), Civil Work (CW) and Work for Others construction projects.
• Provides technical advice and assistance to all section team members, and authoritative advice on projects during both the design and construction phases.
• Advises construction contractors and engineering firms on interpretation of the technical requirements of contracts.
• Analyzes and designs the more complex electrical engineering features of District projects such as electrical distribution systems, transmission modeling and airfield night and navigation lighting.
• Performs technical reviews and has final approval authority over all electrical engineering features of Architect-Engineer (A-E) designs.

Requirements

Help

Conditions of employment

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Incumbent is required to possess and maintain registration as a Professional Engineer (PE). (MUST BE UPLOADED AT THE TIME OF APPLICATION)
• Position requires Temporary Duty Travel (TDY) at least 25% of the duty time.

Qualifications

Who May Apply: s

In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for an Electrical Engineer:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience: One year of specialized experience which includes:

1. Plan the design and technical review of complex electrical systems such as power distribution, lighting, and control systems to ensure compliance with quality standards and codes for military and civil works projects.

2. Mentor electrical engineers by facilitating daily work, communicating project objectives, or technical training. AND

3. Utilize state-of-the-art software for 3-dimensional modeling, electrical service fault analysis, photometric lighting and ARC Flash Energy analysis. (Experience MUST be clearly identifiable within resume)

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience aloneno substitution of education for experience is permitted.

You will be evaluated on the basis of your level of competency in the following areas:

Communications, Electrical Engineering, and Technical Competence

Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: ;br>
Additional information

• Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
• You will be required to provide proof of U.S. Citizenship.
• One year trial/probationary period may be required.
• Direct Deposit of Pay is required.
• Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
• If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
• This is a(n) Engineers & Scientists (Construction) Career Field position.
• Multiple positions may be filled from this announcement.
• Salary includes applicable locality pay or Local Market Supplement.
• When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit for more information.
• Permanent Change of Station (TCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
• Payment of Permanent Change of Station (TCS) costs is authorized, subject to the provisions of the Joint Travel Regulations.
• Position may be filled as a Term Appointment NTE 13 months. Term appointments may be extended beyond of six (6) years, up to eight (8) years. With DoD approval, term appointments may be extended beyond eight (8) years.
• A Recruitment/Relocation Incentive MAY be offered, depending on funding availability and management discretion. An Incentive must be requested by selected applicant at the time of the tentative job offer and approved prior to hire. An Incentive requires a signed service agreement.
• Current permanent Federal employees (to include permanent Army employees) applying for a Term Appointment will be appointed/converted into a Term Appointment with no statutory return rights back to a permanent position.
• Current, Permanent Army employees that are eligible and would like to be considered for a time-limited promotion, reassignment or change to lower grade not to exceed (NTE) 1 year will need to apply to Announcement # CEDD-26-12908567-MP.

Expand Hide additional information

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

Benefits

Help

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.