ENGINEERING TECHNICIAN

Summary

You will serve as an ENGINEERING TECHNICIAN in the CARRIER OR SUBMARINE PROJECT ENGINEERING & PLANNING DIVISIONS, ENGINEERING & PLANNING DEPARTMENT of PSNS and IMF.

Duties

Help

• You will monitor execution by the Engineering and Planning Department of the Plan of Action and Milestones (POAM) developed for the specific ship or project by the Project Planning Team to guide efforts for successful project completion.
• You will coordinate the efforts of all divisions of the Engineering and Planning Department with other organizational elements of the shipyard to ensure satisfactory progress of the project.
• You will provide reports as required by management on the status of project problems, progress and funding expenditures.
• You will review all outgoing and incoming correspondence, deviations and waivers, Engineering Change Proposals, letters etc. pertaining to assigned projects for completeness and cost impact.
• You will coordinate the work effort and the resolutions of problems as they arise.

Requirements

Help

Conditions of employment

• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• This is a bargaining unit position.
• You will be required to successfully complete a pre-appointment physical examination.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector analyzing or developing technical engineering work methods and procedures to provide project planning and technical direction to support the execution of ship maintenance and repair projects to include identifying project barriers or recommending solutions.

Additional qualification information can be found from the following Office of Personnel Management website:

;br>
Engineering Technical Series 0802 (opm.gov)

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following Basic Requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess Specialized Experience (for positions at GS-4 or equivalent and above):

Examples of qualifying specialized experience include technical work in: drafting, surveying construction estimating, physical science, mathematics, aerospace, architecture, chemicals, electrical or mechanical systems, mining, petroleum, or nuclear systems.

Experience in a trade or craft may be credited as specialized experience when the work provided intensive knowledge of engineering principles, techniques, methods, and precedents. Examples are trade positions with substantial developmental, test, or design responsibilities such as:

• Planner and estimator who analyzed designs for production purposes.
• Instrument maker or model maker who performed design or development work on devices fabricated.

OR

Education and Training:

For positions at GS-3 (or equivalent):

Successful completion of l year of post secondary study that included at least 6 semester hours in any combination of courses such as engineering, engineering or industrial technology, construction, physics, drafting, surveying, physical science, or mathematics.

For positions at GS-4 (or equivalent):

Successful completion of 2 years of post secondary study that included at least 12 semester hours in any combination of courses such as those shown above for GS-3 (or equivalent). At least 3 of the 12 semester hours must have been in drafting if the position has been designated by a drafting area of specialization.

For positions at GS-5 (or equivalent):

Successful completion of a full 4-year course of study leading to a bachelor's degree (a) with major study in an appropriate field of engineering, construction, or industrial technology; or (b) that included at least 24 semester hours in any combination of courses such as those shown above for GS-3 (or equivalent). At least 6 of the 24 semester hours must have been in drafting if the position has been designated by a drafting area of specialization.

Certification:

Engineering technicians may be certified by the National Institute for Certification in Engineering Technologies, an organization sponsored by the National Society of Professional Engineers. Certification by the Institute will be helpful as a measure of the technician's quality of experience.

Additional Requirements for Positions with Parenthetical Titles:

In addition to the basic requirements, some positions have additional requirements related to one or more of the following parenthetical titles that must be defined by the employing agency:

• Aerospace
• Architecture
• Chemical
• Civil
• Drafting
• Electrical
• Materials
• Mechanical
• Mining
• Naval Architecture
• Nuclear
• Petroleum

Additional information

This position is covered by the Department of Defense Priority Placement Program.

Additional vacancies may be filled by this announcement.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

During the application process you will have the option to opt-in to make your resume available to hiring managers in the agency who have similar positions. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: ;br>
This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.

ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: ;br>
Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.

PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.

Pay retention may be granted when certain conditions are met.

Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.

A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.

Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement.

Applicants selected and hired on this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement.

Referral Lists will be issued on an as needed basis as vacancies occur.

All eligibility, qualifications, and time-in-grade requirements must be met by the referral cut-off date.

Expand Hide additional information

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

Benefits

Help

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.