jobs in austin, tx, us

Austin, Texas

•

Today

Job Description: Duties: Collaborate with architecture, systems and design teams to understand the product requirements and develop verification plans to meet the project specifications. Responsible for functional simulations and design debugs. Develop functional (digital) verification plans, test cases, Verification IP, and test bench components. Understand development boards and lab equipment to perform digital silicon validation. Develop infrastructure and test cases targeted for an IP, sub-s

Full-time

USD 124,800.00 per year

Principal Engineer

Austin, Texas

•

Today

Job Description: Duties: Perform semiconductor engineering design, development, and testing for firm products and devices in conjunction with product development for the electronic communications industry. Work on a wide range of SoCs spanning different process technologies and market segments to produce a best-in-class combination of power, performance, and thermal behavior. Responsible for device to architecture level optimizations as well as hardware/software co-design. Design a wide-range of

Full-time

USD 187,272.00 per year

DIGITAL VERIFICATION ENGINEER

Austin, Texas

•

Today

Full-time

USD 129,846.30 per year

Reliability Engineer

Austin, Texas

•

Today

Job Description: Duties: Perform semiconductor engineering design, development, and testing for firm products and devices in conjunction with product development for the electronic communications industry. Responsible for developing methods for reporting statuses, results, metrics, recommended solutions and improvements and help needed with the intent of achieving approval from Business and Quality Management. Support new product introduction and ensure all quality and reliability procedures and

Full-time

USD 111,717.00 per year

Software Engineer

Austin, Texas

•

Today

Job Description: Duties: Perform semiconductor engineering duties and specify, design, and integrate software components into a complete product. Design and develop solutions to semiconductor applications problems in furtherance of consumer electronics, industrial and automotive industry. Design, develop, test and document software systems and applications for enhancements and new products; facilitate the smooth integration of microcontrollers, processors, and development platforms into relevant

Full-time

USD 139,152.00 per year

Data Scientist

Austin, Texas

•

Today

Job Description: Duties: Deliver systems solutions for high-volume semiconductor wafer manufacturing environment through data analytics, utilizing machine learning and artificial intelligence applications. Responsible for integration of manufacturing quality, engineering, production, and support organizations on projects to optimize Time to Detect issues, quality solutions and incident prevention. Utilize data analytic techniques, advanced statistical methods, programming skills and semiconducto

Full-time

USD 128,750.00 per year

Product/Test Engineering (NPI/NTI)

Austin, Texas

•

Today

Job Description: Duties: Perform semiconductor engineering design, development, and testing for firm products and devices in conjunction with product development for the electronic communications industry. Collaborate with test engineering and design teams to define test plans, based on knowledge of ATE capabilities and limitations, for new product development. Develop test programs on automated test equipment with an emphasis on quality of coverage and cost effectiveness characterize and debug

Full-time

USD 122,923.13 per year

N2 Metrology Equipment Technician

Austin, Texas

•

Today

Primary Responsibilities: The candidate(s) selected will be responsible for performing scheduled and unscheduled maintenance in the ATMC Photo/Metro/AMHS Equipment area.Maintain, repair, upgrade, and monitor wafer fabrication equipment in Metrology (4-point probe, Atomic Force Microscopy, CDSEM, Film Thickness measurement tools, Defect inspection tools, etc.)The tasks include, but are not limited to, troubleshooting and repair of electrical/electronic systems, pneumatic and mechanical systems, s

Full-time

NVM Reliability Engineer

Austin, Texas

•

Today

Role Summary: The NVM Reliability team is responsible for characterizing, modeling, and enabling next-generation Non-Volatile Memory technologies, enabling new product creation company-wide. Job Responsibility: Interface with foundries and other external suppliers of technology and IP to assess reliability margin to product applications.Establish qualification requirements for new technology and product introduction.Perform rigorous statistical analysis of reliability characterization data.Enabl

Full-time

N1 Metrology Technician

Austin, Texas

•

Today

Job Description Primary Responsibilities: The candidate(s) selected will be responsible for performing scheduled and unscheduled maintenance in the ATMC Metrology Equipment area.Maintain, repair, upgrade, and monitor wafer fabrication equipment in Metrology (4-point probe, Atomic Force Microscopy, CDSEM, CD Verity, Film Thickness measurement tools (KLA UVxxPIN), Defect inspection tools (KLA 8100, SP1, etc.)The tasks include, but are not limited to, troubleshooting and repair of electrical/elect

Full-time

Principal/Sr Principal Digital Validation Engineer

Austin, Texas

•

Today

As part of an SoC validation team, the candidate will be required to perform LPDDR functional validation of various SoC products. The validation may include controller level and sub-system level directed or stress testing and may be performed on various platforms such as pre-silicon emulation models and post-silicon validation boards. The validation may also include LPDDR interface and protocol validation under process/voltage/temperature conditions. The candidate will be expected to understand

Full-time

D2 Metrology Equipment Technician

Austin, Texas

•

Today

Primary Responsibilities: The candidate(s) selected will be responsible for performing scheduled and unscheduled maintenance in the ATMC Metrology Equipment area. Maintain, repair, upgrade, and monitor wafer fabrication equipment in Metrology (4-point probe, Atomic Force Microscopy, CDSEM, CD Verity, Film Thickness measurement tools (KLA UVxxPIN), Defect inspection tools (KLA 8100, SP1, etc.)The tasks include, but are not limited to, troubleshooting and repair of electrical/electronic systems, p

Full-time

Metrology Maintenance Technician

Austin, Texas

•

Today

Job Description Primary Responsibilities: The candidate(s) selected will be responsible for performing scheduled and unscheduled maintenance in the ATMC Photo/Metro/AMHS Equipment area.Maintain, repair, upgrade, and monitor wafer fabrication equipment in Metrology (4-point probe, Atomic Force Microscopy, CDSEM, Film Thickness measurement tools, Defect inspection tools, etc.)The tasks include, but are not limited to, troubleshooting and repair of electrical/electronic systems, pneumatic and mech

Full-time

D1 Metrology Equipment Technician

Austin, Texas

•

Today

Full-time

Senior Thin Films Process Engineer

Austin, Texas

•

Today

NXP's Austin Technology and Manufacturing Center (ATMC) has an immediate opening for a Senior Thin Films Process Engineer. ATMC is NXP's most advanced internal 200mm high volume manufacturing wafer fab, producing Automotive and Industrial products with our 90nm - 250nm Copper and Aluminum Process Technologies. The position requires ownership and responsibility for process control, process development, and optimization of semiconductor processes and equipment. This role plays a critical part in e

Full-time

Etch Equipment Engineer

Austin, Texas

•

Today

NXP's Front End Operations plays an essential role in the company's success by ensuring manufacturing excellence and delivery of high quality, scalable, and cost-competitive semiconductor devices to create a winning advantage for our Customers. Primary Responsibilities: Engineering owner of 200mm AMAT MXP/MXP+/SUPERE/DPS/DPSII and/or TEL DRM/SCCM etch wafer fabrication equipment.Drive equipment performance to maximize capacity and yield performance.Reduce cost of equipment ownership.Write and ma

Full-time

Senior Verification Engineer

Austin, Texas

•

Today

Job Title: Senior Verification Engineer Location: Austin Role Summary: This position is within the MME MCU/MPU Digital IP team. We develop best-in-class digital IPs for NXP's automotive and advanced microcontroller businesses, delivering sensor and processing technologies that enable secure, connected vehicles today and autonomous vehicles of the future. Drive a "zero-defect" mindset across the verification team Provide technical leadership and guidance on complex verification challenges Men

Full-time

Sr. Analog Validation Engineer

Austin, Texas

•

Today

The Analog Validation Engineer / Architect is responsible for comprehensive validation of key product indicators (KPI's) as defined in the system compliance matrix for all analog circuitry in any given platform. This means understanding everything that needs to be measured and how to do those measurements in the most highly automated fashion possible. This also means reporting out those measurements in the most concise, clear and comprehensive possible ways. The Analog Validation Engineer is res

Full-time

Package Thermal & Mechanical Simulation Engineer

Austin, Texas

•

Today

The future starts here! Are you ready to join NXP in Package Innovation? The Package Innovation organization is responsible for the design of new packaging concepts and the development of new packaging technologies and assembly processes. It partners with all of the businesses of NXP Semiconductors to deliver the right package for each market and application. Package Innovation is a multi-national organization. Development in our case means working together in teams with business lines, intern

Full-time

Senior Analog Mixed Signals Engineer - Data Converters Expert

Austin, Texas

•

Today

Senior Analog Mixed-Signal IC Designer - Data Converters NXP's AI and Chip Engineering (ACE) organization provides advanced engineering capabilities and reusable semiconductor IP to all NXP product lines. Within ACE, the specialized Data Converter team develops high-performance analog and mixed-signal IP for a broad range of products, technology platforms, and application domains. Our ADC and DAC solutions form the critical interface between the analog world and digital processing. They suppor

Full-time

jobs in Austin, TX, USA